|
15KPA Datasheet, PDF (1/3 Pages) Protek Devices – POWER TVS COMPONENT | |||
|
Reverse Voltage: 17 to 280 V
Peak Pulse Power: 15000 W
15KPA Series
Features
â Glass passivated chip
â 15000 W peak pulse power capability with a 10/1000 μs
waveform, repetitive rate (duty cycle):0.01 %
â Low leakage
â Uni and Bidirectional unit
â Excellent clamping capability
â Very fast response time
â RoHS compliant
Mechanical Data
Axial Lead Transient Voltage
Suppressors
â Case: Molded plastic
â Epoxy: UL 94V-0 rate flame retardant
â Lead: Solderable per MIL-STD-202, method 208 guranteed
â Polarity: Color band denotes cathode end except Bipolar
â Mounting position: Any
Maximum Ratings(TA=25â unless otherwise noted)
Parameter
Peak power dissipation with a 10/1000μs waveform(1)
Peak pulse current wih a 10/1000μs waveform(1)
Power dissipation on infinite heatsink at TL = 75 °C
Peak forward surge current, 8.3 ms single half sine-wave
unidirectional only(2)
Operating junction and storage temperature range
Symbol
PPP
IPP
PD
Value
15000
See Next Table
8.0
IFSM
TJ, TSTG
500
â55 to +150
UNIT
W
A
W
A
°C
Noteï¼
(1)Non-repetitive current pulse per Fig.5 and derated above TA= 25 °C per Fig.1
(2)Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum
E-CMOS Corp. (www.ecmos.com.tw)
Page 1 of 3
4G09N-Rev. F001
|
▷ |