UMB1SU Datasheet, PDF (1/2 Pages) DIYI Electronic Technology Co., Ltd. – SINGLE PHASE 1.0AMP ULTRA FAST GLASS PASSIVATED BRIDGE RECTIFIER

UMB1SU THRU UMB10SU
SINGLE PHASE 1.0AMP ULTRA FAST GLASS PASSIVATED BRIDGE RECTIFIER
Features
· Glass Passivated Die Construction
· Low leakage
· Ideal for printed circuit board
· Surge overload rating-35A peak
· Designed for Surface Mount Application
· Plastic Material-UL Flammability 94V-0
Mechanical Data
· Case:Reliable low cost construction
utilizing molded plastic technique
MBS
0.028(0.7)
0.020(0.5)
צ㾦
e
0.195(4.95)
0.177(4.5)
0.106(2.7)
0.090(2.3)
· Terminals:Plated Leads Solderable per MIL-
STD-202,Method208
· Polarity:As Marked on Case
· Mounting Position:Any
· Marking:Type Number
0.043(1.1)
0.023(0.6)
0.161(4.1)
0.142(3.6)
0.067(1.7)
dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ ambient temperature unless otherwise specified.
Single Phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
TYPE NUMBER
SYMBOL UMB1SU UMB2SU UMB4SU UMB6SU UMB8SU UMB10SU UNITS
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
VRRM
VRWM 100
200
400 600 800
1000 V
VDC
VRMS
70
140
280
420
560
700
V
Average Rectified Output Current (Note 1)@TA=40℃
IO
1.0
A
Non-Repetitive Peak Forward Surge Current 8.3ms
Single half sine-wave superimposed on rated load
(JEDEC Method)
Forward Voltage per element @IF=1.0A
Peak Reverse Current
@TA=25℃
At Rated DC Blocking Voltage @TA=125℃
Maximum reverse recovery time (Note 2)
Typical Junction Capacitance per leg
Typical Thermal Resistance per leg (Note 3)
Operating and Storage Temperature Range
IFSM
VFM
IR
TRR
CJ
RθJA
RθJL
TJ,TSTG
35
1.0
1.3
1.7
5.0
500
50
75
13
70
20
-55to+150
A
V
uA
ns
pF
℃/W
℃
Note:1. Mounted on glass epoxy PC board with 1.3mm² solder pad.
2. Reverse Recovery Test Conditions: IF=0.5A, IR=1A, Irr=0.25A.
3. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.
version:01
1 of 2
www.dyelec.com