UG6KB05A Datasheet, PDF (1/2 Pages) DIYI Electronic Technology Co., Ltd. – SINGLE PHASE 6.0AMP GLASS PASSIVATED BRIDGE RECTIFIER

UG6KB05A THRU UG6KB100A
SINGLE PHASE 6.0AMP GLASS PASSIVATED BRIDGE RECTIFIER
Features
· Glass passivated die construction
· _{Low forward voltage drop}
· High current capability
· ^{High surge current capability}
· ^{Designed for surface mount application}
· Plastic material-UL flammability 94V-0
.024(0.6)
.016(0.4)
D3K
0.341(8.65)
.325(0.825)
Mechanical Data
· Case: D3K,molded plastic
· ^{Terminal: Plated leads solderable}
per MIL-STD 202,Method 208
· Polarity: As Marked on case
· Mounting Position:Any
· Marking: Type Number
· Lead Free: For RoHS/Lead Free Version
Dimiensions in inches and （milimeters）
Maximum Ratings and Electrical Characteristics
Rating at 25℃ ambient temperature unless otherwise specified.
Single Phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
TYPE NUMBER
SYMBOL ^{UG6K UG6K}
B05A B10A
UG6K
B20A
UG6K
B40A
UG6K
B60A
UG6K
B80A
UG6K
B100A
UNIT
Peak Repetitive Reverse
Voltage Working Peak Reverse
Voltage DC Blocking Voltage
V_RRM
V_{RWM 50}
V_DC
100 200 400 600 800 1000 V
RMS Reverse Voltage
V_RMS 35 _{70 140 280 420 560} 700 V
Average Rectified
Output Current
Without heat sink @T_A=30℃
With heat sink @T_A=140℃
I_o
3.0
6.0
A
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave superimposed on
I_FSM
120
A
rated load (JEDEC Method)
Forward Voltage per element @IF=6.0A
V_FM
1.1
V
Maximum DC reverse current at T_A=25℃
rated DC blocking voltage per leg T_A=125℃
I_R
5.0
500
uA
Typical Juntion Capacitance per leg
Typical thermal resistance per leg(Note 2)
Operating and Storage Temperature Range
C_J
R_θJA
R_θJL
T_J,T_STG
21
55
15
-55 to +150
pF
℃/W
℃
Note:1. Measured at 1.0 MHZ and applied reverse voltage of 4.0VD.C.
version: 01
1 of 2
www.dyelec.com