SMAFP4SMAFJ5.0 Datasheet, PDF (1/4 Pages) DIYI Electronic Technology Co., Ltd. – For surface mounted applications in order to optimize board space

Features
P4SMFJ Series
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
VOLTAGE 5.0 to 180 Volts 400 Watt Peak Power Pulse
For surface mounted applications in order to optimize board space.
Glass passivated junction
Excellent clamping capability
Low inductance
Flammability Classification 94V-0
High temperature soldering : 260^OC / 10 seconds at terminals
• Green molding oc mpound as per IEC61249 Std. . (Halogen Free)
SMAF
Mechanical Data
Case: SMAF low profile molded plastic
Terminals: Solder leads, solderable per MIL-STD-750, Method 2026
Polarity: Indicated by cathode band except Bi-directional types.
Dimiensions in inches and (milimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25°Cambient temperature unless otherwise specified. Resistive or inductive load, 60Hz.
For Capacitive load derate current by 20%.
RATING
SYMBOL
Peak Power Dissipation on 10/1000us waveform (Note1.2 , Fig.1) ^Ppp
VALUE
400
Peak Forward Surge Current, 8.3ms single half sine - wave
uni- directional only (JEDEC method) (Notes 2,3)
I FSM
40
Peak Pulse Current on 10/1000s waveform(Note 1 , Fig.3)
IPP
See Table 1
Operating and Storage Temperature Range
TJ, TSTG
-55 ~ +150
NOTES:
1. Non-repetitive current pulse, per Fig.3 and derated above TA = 25°C per Fig.2.
2. Mounted on 5.0 mm ²(0.13mm thick) land areas.
3. Measured on 8.3ms, single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum.
UNITS
Watts
Amps
Amps
°C
version:01
1of4
www.dyelec.com