RMB1M_17 Datasheet, PDF (1/3 Pages) DIYI Electronic Technology Co., Ltd. – SINGLE PHASE 0.8AMP FAST GLASS PASSIVATED BRIDGE RECTIFIER

RMB1M THRU RMB10M
SINGLE PHASE 0.8AMP FAST GLASS PASSIVATED BRIDGE RECTIFIER
Features
· Glass Passivated Die Construction
· Low leakage
· Ideal for printed circuit board
· Surge overload rating-30A peak
· Designed for Surface Mount Application
· Plastic Material-UL Flammability 94V-0
Mechanical Data
· Case:Reliable low cost construction
utilizing molded plastic technique
· Terminals:Plated Leads Solderable per MIL-
STD-202,Method208
· Polarity:As Marked on Case
· Mounting Position:Any
· Marking:Type Number
0.051（1.3）
0.035（0.9）
-₊
MBM
0.157（4.0）
0.134（3.4）
~~
0.012（0.30）
0.028（ 0.7）
0.004（0.10）
0.016（0.4）
0.236（ 6.0）
0.106（2.7） 0.213^（5.4 ^）
0.091（2.3）
0.203（5.15）
0.179（4.55）
0.106（2.7）
0.091（2.3）
0.193（4.90）
0.177（4.50）
dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ ambient temperature unless otherwise specified.
Single Phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
TYPE NUMBER
SYMBOL
RMB1M RMB2M RMB4MRMB6M RMB8M RMB10M UNITS
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
VRRM
VRW M
VDC
VRMS
100 200 400 600 800 1000 V
70 140 280 420 560 700
V
Average Rectified Output Current (Note 1)@TC=100℃
(Note 2)@TC=100℃
IF(AV)
0.5
0.8
A
Non-Repetitive Peak Forward Surge Current 8.3ms
Single half sine-wave superimposed on rated load
IFSM
30
(JEDEC Method)
I²t Rating for Fusing (t < 8.3ms)
I²t
3.735
Forward Voltage per element @IF=0.8A
Peak Reverse Current
@TA=25℃
At Rated DC Blocking Voltage @TA=125℃
Maximum reverse recovery time（Note 3）
Typical Junction Capacitance per leg (Note 4)
Typical Thermal Resistance per leg
Operating and Storage Temperature Range
VFM
IR
TRR
CJ
RθJA
RθJL
TJ,TSTG
1.3
5.0
200
150
250
500
13
60
16
-55to+150
Note:1. Mounted on glass epoxy PC board with 1.3mm² solder pad.
2. Mounted on aluminum substrate PC board with 1.3mm² solder pad.
3. Reverse Recovery Test Conditions: IF=0.5A, IR=1A, Irr=0.25A.
4. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.
A
A²s
V
uA
ns
pF
℃/W
℃
version:02
1 of 3
www.dyelec.com