RMB1FU_17 Datasheet, PDF (1/3 Pages) DIYI Electronic Technology Co., Ltd. – SINGLE PHASE 1.0AMP FAST GLASS PASSIVATED BRIDGE RECTIFIER

RMB1FU THRU RMB10FU
SINGLE PHASE 1.0AMP FAST GLASS PASSIVATED BRIDGE RECTIFIER
Features
· ^{Glass Passivated Die Construction}
· ^{Low leakage}
· Ideal for printed circuit board
Surge overload rating-35A peak
· Designed for Surface Mount Application
· Plastic Material-UL Flammability 94V-0
-₊
Mechanical Data
· Case: MB-F, molded plastic
· Terminals: plated leads solderable per
MIL-STD-202, Method 208
· Polarity: as marked on case
· Mounting position: Any
· Marking: type number
· Lead Free: For RoHS / Lead Free Version,
MAX.
dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ ambient temperature unless otherwise specified.
Single Phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
TYPE NUMBER
SYMBOL RMB1FU RMB2FU RMB4FU RMB6FU RMB8FU RMB10FU _UNITS
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
VRRM
VRW M
100
200
400
600
800
1000
V
VDC
VRMS
70
140
280
420
560
700
V
Average Rectified Output Current (Note 1) @TC =100℃ IF(AV)
1.0
A
Non-Repetitive Peak Forward Surge Current 8.3ms
Single half sine-wave superimposed on rated load
IFSM
(JEDEC Method)
I²t Rating for Fusing (t < 8.3ms)
I²t
Forward Voltage per element @IF=1.0A
VFM
Peak Reverse Current
@TA=25℃
At Rated DC Blocking Voltage @TA=125℃
Maximum reverse recovery time (Note 2)
Typical Junction Capacitance per leg (Note3)
Typical Thermal Resistance per leg
Operating and Storage Temperature Range
IR
TRR
CJ
RθJA
RθJL
TJ,TSTG
Note:1. Mounted on glass epoxy PC board with 1.3mm² solder pad.
2. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A.
3. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.
version:02
1 of 3
35
A
5.083
A²s
1.3
V
5.0
200
uA
150
250
500
ns
13
pF
60
16
-55to+150
℃/W
℃
www.dyelec.com