RMB1FU Datasheet, PDF (1/2 Pages) DIYI Electronic Technology Co., Ltd. – SINGLE PHASE 1.0AMP FAST GLASS PASSIVATED BRIDGE RECTIFIER

RMB1FU THRU RMB10FU
Features
SINGLE PHASE 1.0AMP FAST GLASS PASSIVATED BRIDGE RECTIFIER
· ^{Glass Passivated Die Construction}
· ^{Low leakage}
· Ideal for printed circuit board
Surge overload rating-35A peak
· Designed for Surface Mount Application
· Plastic Material-UL Flammability 94V-0
Mechanical Data
· Case: MB-F, molded plastic
· Terminals: plated leads solderable per
MIL-STD-202, Method 208
· Polarity: as marked on case
· Mounting position: Any
· Marking: type number
· Lead Free: For RoHS / Lead Free Version,
dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ ambient temperature unless otherwise specified.
Single Phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
TYPE NUMBER
SYMBOL RMB1FU RMB2FU RMB4FU RMB6FU RMB8FU RMB10FU _UNITS
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
VRRM
VRW M
100
200
400
600
800
1000
V
VDC
VRMS
70
140
280
420
560
700
V
Average Rectified Output Current (Note 1)@TA=40℃ _IO
1.0
A
Non-Repetitive Peak Forward Surge Current 8.3ms
Single half sine-wave superimposed on rated load
(JEDEC Method)
Forward Voltage per element @IF=1.0A
Peak Reverse Current
@TA=25℃
At Rated DC Blocking Voltage @TA=125℃
Maximum reverse recovery time (Note 2)
Typical Junction Capacitance per leg (Note3)
Typical Thermal Resistance per leg
Operating and Storage Temperature Range
IFSM
VFM
IR
TRR
CJ
RθJA
RθJL
TJ,TSTG
35
1.3
5.0
500
150
250
500
13
70
20
-55to+150
A
V
uA
ns
pF
℃/W
℃
Note:1. Mounted on glass epoxy PC board with 1.3mm² solder pad.
2. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A.
3. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.
version:01
1 of 2
www.dyelec.com