P2SMASJ5.0A Datasheet, PDF (1/3 Pages) DIYI Electronic Technology Co., Ltd. – For surface mounted applications in order to optimize board space

P2SMSJ Series
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
VOLTAGE 5.0 to 170 Volts 200 Watt Peak Power Pulse
FEATURES
For surface mounted applications in order to optimize board space.
Glass passivated junction
Excellent clamping capability
Low inductance
Flammability Classification 94V-0
High temperature soldering : 260^OC / 10 seconds at terminals
• Green molding oc mpound as per IEC61249 Std. . (Halogen Free)
0.079(2.0)
0.063(1.6)
SOD-123FL
8°(8°)
2°(2°)
0.150(3.8)
0.134(3.4)
MECHANICAL DATA
Case : Molded plastic
Polarity : Indicated by cathode band
0.047(1.2)
0.032(0.8)
0.037(0.95)
0.022(0.55)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25°Cambient temperature unless otherwise specified. Resistive or inductive load, 60Hz.
For Capacitive load derate current by 20%.
RATING
SYMBOL
Peak Power Dissipation on 10/1000us waveform (Note1.2 , Fig.1) ^Ppp
VALUE
200
Peak Forward Surge Current, 8.3ms single half sine - wave
superimposed on rated load For(JEDEC method) (Notes 2,3)
I FSM
20
Peak Pulse Current on 10/1000s waveform(Note 1 , Fig.3)
IPP
See Table 1
Operating and Storage Temperature Range
TJ, TSTG
-55 ~ +150
NOTES:
1. Non-repetitive current pulse, per Fig.3 and derated above TA = 25°C per Fig.2.
2. Mounted on 5.0 mm ²(0.13mm thick) land areas.
3. Measured on 8.3ms, single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum.
UNITS
Watts
Amps
Amps
°C
version:01
1 of 3
www.dyelec.com