MBRF20100CT Datasheet, PDF (1/3 Pages) Motorola, Inc – SWITCHMODE™ Schottky Power Rectifirers

20 AMPERES SCHOTTKY BARRIER RECTIFIERS
FEATURES
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-0.
Flame Retardant Epoxy Molding Compound.
• Metal silicon junction, majority carrier conduction
• Low power loss, high efficiency.
• High current capability
• For use in low voltage, high frequency inverters
free wheeling, and polarlity protection applications.
• Lead free in comply with EU RoHS
MECHANICAL DATA
• Case: ITO-220AB molded plastic
• Terminals: Solder plated, solderable per MIL-STD-750, Method 2026
• Polarity: As marked.
• Mounting Position: Any
MBRF20100CT
VOLTAGE
CURRENT
100 Volts
20 Amperes
ITO-220AB
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
PARAMETER
SYMBOL
MBRF20100CT
UNIT
Maximum Repetitive Peak Reverse Voltage
V_RRM
100
V
Maximum RMS Voltage
V_RMS
70
V
Maximum DC Blocking Voltage
V_DC(AV)
100
V
Average Rectified Output Current
@Tc=120°C
I_F
20
A
Peak Forward Surge Current 8.3ms single half sine-wave
superimposed on rated load
I_FSM
150
A
IF=10A@
Tj=25°C
0.85
Maximum Forward Voltage IF=10A@
Note(1)
IF=20A@
Tj=125°C
Tj=25°C
V_F
0.75
0.95
V
IF=20A@
Tj=125°C
0.85
Maximum DC Reverse Current at Rated DC Tj=25°C
Blocking Voltage
Tj=125°C
IR
0.01
10
mA
Typical thermal resistance Junction to Case (Note 2)
Typical thermal resistance Junction to Lead (Note 2)
Typical Thermal Resistance (Note 3)
RΘ_JC
RΘ_JL
CJ
Operating junction temperature range
Storage temperature range
T_J
T_STG
Note :
(1) 300us pulse width, 2% duty cycle.
(2) Device mounted on 135 mm x 135 mm x 8 mm Aluminum Plate Heatsink
(3) Measured at 1.0MHz and applied reverse voltage of 4.0 DC.
2.0
2.0
350
-55 to +150
-55 to +175
°C/W
°C/W
pF
°C
°C
Jun,2015-REV.00
www.dyelec.com
PAGE . 1