MB05MN Datasheet, PDF (1/2 Pages) DIYI Electronic Technology Co., Ltd. – SINGLE PHASE 0.5AMP SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER

MB05MN THRU MB10MN
SINGLE PHASE 0.5AMP SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER
Features
· Glass Passivated Die Construction
· Low leakage
· Ideal for printed circuit board
· Surge overload rating-25A peak
· Designed for Surface Mount Application
· Plastic Material-UL Flammability 94V-0
Mechanical Data
· Case:Reliable low cost construction
utilizing molded plastic technique
· Terminals:Plated Leads Solderable per MIL-
STD-202,Method208
· Polarity:As Marked on Case
· Mounting Position:Any
· Marking:Type Number
Maximum Ratings and Electrical Characteristics
Rating at 25℃ ambient temperature unless otherwise specified.
Single Phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
MBM
0.157（4.0）
0.134（3.4）
0.028（ 0.7）
0.016（0.4）
0.051（1.3）
0.035（0.9）
0.236（ 6.0）
0.213（5.4 ）
0.012（0.30）
0.004（0.10）
0.106（2.7）
0.091（2.3）
0.203（5.15）
0.179（4.55）
0.106（2.7）
0.091（2.3）
0.193（4.90）
0.177（4.50）
Dimiensions in inches and（milimeters）
TYPE NUMBER
SYMBOL _{MB05MN MB1MN} MB2MN MB4MN MB6MN MB8MN MB10MN UNITS
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
VRRM
VRW M
50
VDC
VRMS
35
100 200 400 600
70 140 280 420
800 1000 V
560
700
V
Average Rectified Output Current @TA=40℃
IO
0.5
A
Non-Repetitive Peak Forward Surge Current 8.3ms
Single half sine-wave superimposed on rated load
IFSM
(JEDEC Method)
Forward Voltage per element @IF=0.5A
Peak Reverse Current
@TA=25℃
At Rated DC Blocking Voltage @TA=125℃
Typical Junction Capacitance per leg
Typical Thermal Resistance per leg (Note 3)
Operating and Storage Temperature Range
VFM
IR
CJ
RθJA
RθJL
TJ,TSTG
25
0.95
5.0
500
13
70
20
-55to+150
A
V
uA
pF
℃/W
℃
Note:1. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.
version:01
1 of 2
www.dyelec.com