MB05F Datasheet, PDF (1/2 Pages) PACELEADER INDUSTRIAL – Miniature Glass Passivated Single-Phase Surface Mount Flat Bridge Rectifier

MB05F THRU MB10F
SINGLE PHASE 0.8AMP SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER
Features
· Glass passivated die construction
· Low forward voltage drop
· High current capability
· High surge current capability
· Designed for surface mount application
· Plastic material-UL flammability 94V-0
Mechanical Data
· Case: MB-F, molded plastic
· Terminals: plated leads solderable per
MIL-STD-202, Method 208
· Polarity: as marked on case
· Mounting position: Any
· Marking: type number
· Lead Free: For RoHS / Lead Free Version,
dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ ambient temperature unless otherwise specified.
Single Phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
TYPE NUMBER
SYMBOL MB05F MB1F MB2F MB4F MB6F MB8F MB10F UNITS
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
V RRM
VRW M
50
100 200 400 600 800 1000 V
VDC
VRMS
35
70 140 280 420 560 700 V
Average Rectified Output Current (Note 1)@TA=40℃
(Note 2)@TA=40℃
IO
0.5
0.8
A
Non-Repetitive Peak Forward Surge Current 8.3ms
Single half sine-wave superimposed on rated load
(JEDEC Method)
Forward Voltage per element @IF=0.8A
Peak Reverse Current
@TA =25 ℃
At Rated DC Blocking Voltage @TA =125℃
Typical Junction Capacitance per leg (Note3)
Typical Thermal Resistance per leg
Operating and Storage Temperature Range
IFSM
VFM
IR
CJ
RθJA
RθJL
TJ,TSTG
30
1.1
5.0
500
13
120
40
-55to+150
A
V
uA
pF
℃/W
℃
Note:1. Mounted on glass epoxy PC board with 1.3mm² solder pad.
2. Mounted on aluminum substrate PC board with 1.3mm² solder pad.
3. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.
version:01
1 of 2
www.dyelec.com