KBPC50005 Datasheet, PDF (1/3 Pages) Dc Components – TECHNICAL SPECIFICATIONS OF SINGLE-PHASE SILICON BRIDGE RECTIFIER

KBPC50005 THRU KBPC5010
SINGLE PHASE 50.0 AMP GLASS PASSIVATED BRIDGE RECTIFIER
Features
· Glass passivated die construction
· Low forward voltage drop
· High current capability
· High surge current capability
· Plastic material-UL flammability 94V-0
#1H0OSLCERFEOWR
KBPC
~
+
Mechanical Data
· Case: KBPC,Molded Plastic
· _{Terminals: Plated Leads Solderable per}
MIL-STD-202, Method 208
· Polarity: As Marked on Case
· Mounting Position: Any
· Marking: Type Number
· ^{Lead Free: For RoHS / Lead Free Version}
-
~
dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ ambient temperature unless otherwise specified.
Single Phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
TYPE NUMBER
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
SYMBOL KBPC KBPC KBPC KBPC KBPC KBPC KBPC UNITS
50005 5001 5002 5004 ⁵⁰⁰⁶ 5008 ⁵⁰¹⁰
V _RRM
VRW M
50
100 200 400 600 800 1000 V
VDC
RMS Reverse Voltage
VRMS
35
70 140 280 420 560 700 V
Average Rectified Output Current (Note 1)@TC =90℃ IF(AV)
50.0
A
Non-Repetitive Peak Forward Surge Current 8.3ms
Single half sine-wave superimposed on rated load
(JEDEC Method)
I²t Rating for Fusing (t < 8.3ms)
Forward Voltage per element @IF=25.0A
Peak Reverse Current
@TA =25℃
At Rated DC Blocking Voltage @TA =125℃
Typical Junction Capacitance per leg (Note 2)
Typical Thermal Resistance per leg
Operating and Storage Temperature Range
IFSM
I²t
VFM
IR
CJ
RθJC
TJ,TSTG
Note:1. Mounted on 35mm x 35mm x 17mm Al Plate Heatsink.
2. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.
500
1037.5
1.1
10.0
500
300
0.7
-55to+150
A
A²s
V
uA
pF
℃/W
℃
version:00
1 of 3
www.dyelec.com