KBP3005G Datasheet, PDF (1/2 Pages) Micro Commercial Components – 3 Amp Glass Passivated Bridge Rectifier 50 to 1000 Volts

KBP3005 G THRU KBP310G
SINGLE PHASE 3.0AMP GLASS PASSIVATED BRIDGE RECTIFIER
Features
· Glass passivated die construction
· Low forward voltage drop
· High current capability
· High surge current capability
· Plastic material-UL flammability 94V-0
KBP
0.581(14.75)
0.561(14.25)
0.043(1.1)
0.031(0.8)
0.144(3.65)
0.132(3.35)
0.417(10.6)
0.402(10.2)
Mechanical Data
· Case: KBP, molded plastic
· Terminals: plated leads solderable per
MIL-STD-202, Method 208
· Polarity: as marked on case
· Mounting position: Any
· Marking: type number
· Lead Free: For RoHS / Lead Free Version
0.056(1.42)
0.048(1.22)
0.087(2.2)
0.071(1.8)
0.583(14.8)
0.563(14.3)
0.022(0.55)
0.012(0.3)
0.16(4.06)
0.14(3.56)
0.034(0.86)
0.03(0.76)
Dimensions in inches and (millimeters )
Maximum Ratings and Electrical Characteristics
Rating at 25℃ ambient temperature unless otherwise specified.
Single Phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
TYPE NUMBER
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
KBP
SYMBOL _3005G
VRRM
VRWM
50
VDC
VRMS
35
KBP
301G
100
70
KBP
KBP
302G 304G
KBP
306G
KBP KBP _UNITS
308G 310G
200 400 600 800 1000 V
140 280 420 560 700 V
Average Rectified Output Current (Note 1)
@TA=50 ℃
IO
3.0
A
Non-Repetitive Peak Forward Surge Current 8.3ms
Single half sine-wave superimposed on rated load
(JEDEC Method)
Forward Voltage per element @IF=3.0A
Peak Reverse Current
@TA=25℃
At Rated DC Blocking Voltage @TA=125℃
Typical Thermal Resistance per leg (Note 2)
Operating and Storage Temperature Range
IFSM
VFM
IR
RθJA
RθJL
TJ,TSTG
80
1.1
5.0
500
30
11
-55to+150
A
V
uA
℃/W
℃
Note:1. Mounted on glass epoxy PC board with 1.3mm² solder pad.
2. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C..
version:01
1 of 2
www.dyelec.com