KBP2005 Datasheet, PDF (1/2 Pages) Weitron Technology – Glass Passivated Bridge Rectifiers

KBP2005 THRU KBP210
SINGLE PHASE 2.0AMP GLASS PASSIVATED BRIDGE RECTIFIER
Features
· Glass passivated die construction
· Low forward voltage drop
· High current capability
· High surge current capability
· Plastic material-UL flammability 94V-0
KBP
0.581(14.75)
0.561(14.25)
0.043(1.1)
0.031(0.8)
FIER
0.144(3.65)
0.132(3.35)
Mechanical Data
· Case: KBP, molded plastic
· Terminals: plated leads solderable per
MIL-STD-202, Method 208
· Polarity: as marked on case
· Mounting position: Any
· Marking: type number
· Lead Free: For RoHS / Lead Free Version
0.417(10.6)
0.402(10.2)
0.056(1.42)
0.048(1.22)
0.087(2.2)
0.071(1.8)
0.583(14.8)
0.563(14.3)
0.022(0.55)
0.012(0.3)
0.16(4.06)
0.14(3.56)
0.034(0.86)
0.03(0.76)
Dimensions in inches and (millimeters )
Maximum Ratings and Electrical Characteristics
Rating at 25℃ ambient temperature unless otherwise specified.
Single Phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
TYPE NUMBER
SYMBOL ^{KBP2005 KBP201 KBP202}
KBP204 KBP206 KBP208 KBP210 UNITS
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
VRRM
VRWM
50
VDC
VRMS
35
100 200 400 600 800 1000 V
70 140
280 420 560 700 V
Average Rectified Output Current (Note 1)
@TA=50 ℃
IO
2.0
A
Non-Repetitive Peak Forward Surge Current 8.3ms
Single half sine-wave superimposed on rated load
(JEDEC Method)
Forward Voltage per element @IF=2.0A
Peak Reverse Current
@TA=25℃
At Rated DC Blocking Voltage @TA=125℃
Typical Thermal Resistance per leg (Note 2)
Operating and Storage Temperature Range
IFSM
VFM
IR
RθJA
RθJL
TJ,TSTG
50
1.1
5.0
500
25
8
-55to+150
A
V
uA
℃/W
℃
Note:1. Mounted on glass epoxy PC board with 1.3mm² solder pad.
2. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C..
version:01
1 of 2
www.dyelec.com