GBU8005G Datasheet, PDF (1/3 Pages) DIYI Electronic Technology Co., Ltd. – SINGLE PHASE 8.0AMP GLASS PASSIVATED BRIDGE RECTIFIER

GBU8005G THRU GBU810G
SINGLE PHASE 8.0AMP GLASS PASSIVATED BRIDGE RECTIFIER
Features
· Glass passivated die construction
· Low forward voltage drop
· High current capability
· High surge current capability
· Plastic material-UL flammability 94V-0
GBU
Mechanical Data
· Case: G B U , molded plastic
· _{Terminals: Plated Leads Solderable per}
MIL-STD-202, Method 208
· Polarity: As Marked on Case
· Mounting Position: Any
· Marking: Type Number
· ^{Lead Free: For RoHS / Lead Free Version}
+
-
~~
dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ ambient temperature unless otherwise specified.
Single Phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
TYPE NUMBER
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
SYMBOL ^GBU
8005G
VRRM
VRW M
50
GBU
801G
100
VDC
GBU
802G
200
GBU GBU
804G 806G
400 600
GBU
808G
GBU
810G
UNITS
800 1000 V
RMS Reverse Voltage
VRMS
35
70 140 280 420 560 700 V
Average Rectified Output Current (Note 1)@TC =90℃ _IF(AV)
8.0
A
Non-Repetitive Peak Forward Surge Current 8.3ms
Single half sine-wave superimposed on rated load
IFSM
(JEDEC Method)
Forward Voltage per element
@IF=4A
@IF=8A
Peak Reverse Current
@TA =25 ℃
At Rated DC Blocking Voltage @TA =125℃
I²t Rating for fusing (t <8.3ms)
Typical Junction Capacitance per leg (Note 2)
Typical Thermal Resistance per leg (Note 3)
Operating and Storage Temperature Range
VFM
IR
I²t
CJ
RθJA
RθJL
TJ,TSTG
Note:1. Mounted on glass epoxy PC board with 1.3mm² solder pad.
2. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.
3. Device mounted on 50mm x 50mm x 1.6mm Cu Plate Heatsink.
200
1.0
1.1
5.0
500
166
70
30.9
7.3
-55to+150
A
V
uA
A²s
pF
℃/W
℃
version:02
1 of 3
www.dyelec.com