EMB1FU Datasheet, PDF (1/2 Pages) DIYI Electronic Technology Co., Ltd. – SINGLE PHASE 1.0AMP SUPER FAST GLASS PASSIVATED BRIDGE RECTIFIER

EMB1FU THRU EMB6FU
SINGLE PHASE 1.0AMP SUPER FAST GLASS PASSIVATED BRIDGE RECTIFIER
Features
· Glass passivated die construction
· Low forward voltage drop
· High current capability
· High surge current capability
· Designed for surface mount application
· Plastic material-UL flammability 94V-0
Mechanical Data
· Case: MB-F, molded plastic
· Terminals: plated leads solderable per
MIL-STD-202, Method 208
· Polarity: as marked on case
· Mounting position: Any
· Marking: type number
· Lead Free: For RoHS / Lead Free Version,
dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ ambient temperature unless otherwise specified.
Single Phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
TYPE NUMBER
SYMBOL EMB1FU EMB2FU EMB3FU EMB4FU EMB6FU UNITS
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
V RRM
VRW M
100
200
300
400
600
V
VDC
RMS Reverse Voltage
VRMS
70
140
210
280
420
V
Maximum average forward rectified current @TA=40℃
IO
1.0
A
Non-Repetitive Peak Forward Surge Current 8.3ms
Single half sine-wave superimposed on rated load
IFSM
35
A
(JEDEC Method)
Forward Voltage per element @IF=1.0A
Peak Reverse Current
@TA=25 ℃
At Rated DC Blocking Voltage @TA =125℃
Maximum reverse recovery time (Note 1)
Typical Junction Capacitance per leg
Typical Thermal Resistance per leg (Note 2)
Operating and Storage Temperature Range
VFM
IR
TRR
CJ
R θJA
RθJL
TJ,TSTG
0.95
1.25
5.0
500
35
25
60
16
-55to+150
1.7 V
uA
nS
pF
℃/W
℃
Note:1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A
2.Thermal resistance from junction to ambient and from junction to lead mounted on P.C.B
with 0.5×0.5''(13×13mm)copper pads.
version:01
1 of 2
www.dyelec.com