DB101S Datasheet, PDF (1/2 Pages) Rectron Semiconductor – SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER

DB101S THRU DB107S
SINGLE PHASE 1.0AMP SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER
Features
· Glass passivated die construction
· Low forward voltage drop
· High current capability
· High surge current capability
· Designed for surface mount application
· Plastic material-UL flammability 94V-0
DB-S
0.043（1.1）
0.035（0.9 ）
0.311（7.9）
0.291（7.4）
-+
Mechanical Data
· Case: DB-S, molded plastic
· Terminals: plated leads solderable per
MIL-STD-202, Method 208
· Polarity: as marked on case
· Mounting position: Any
· Marking: type number
· Lead Free: For RoHS / Lead Free Version
~~
0.402(10.2)
0.378（9.6）
0.329（8.35）
0.313（7.95）
0.098（2.50）
0.083（2.10）
0.205（5.2）
0.197（5.0）
Dimensions in inches and （millimeters）
Maximum Ratings and Electrical Characteristics
Rating at 25℃ ambient temperature unless otherwise specified.
Single Phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
TYPE NUMBER
SYMBOL DB101S DB102S DB103S DB104S DB105S DB106S DB107S UNITS
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
50
100 200 400 600 800 1000 V
VDC
RMS Reverse Voltage
VRMS
35
70 140 280 420 560 700 V
Average Rectified Output Current (Note 1)@TA=40℃
IO
1.0
A
Non-Repetitive Peak Forward Surge Current 8.3ms
Single half sine-wave superimposed on rated load
(JEDEC Method)
Forward Voltage per element @IF=1.0A
Peak Reverse Current
@TA=25℃
At Rated DC Blocking Voltage @TA=125℃
Typical Junction Capacitance per leg (Note 2)
Typical Thermal Resistance per leg
Operating and Storage Temperature Range
IFSM
VFM
IR
CJ
RθJA
RθJL
TJ,TSTG
Note:1. Mounted on glass epoxy PC board with 1.3mm² solder pad.
2. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.
50
1.1
5.0
500
25
40
15
-55to+150
A
V
uA
pF
℃/W
℃
version:01
1 of 2
www.dyelec.com