ABF2U Datasheet, PDF (1/2 Pages) Sangdest Microelectronic (Nanjing) Co., Ltd – SINGLE PHASE 1.0AMP SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER

ABF2U _THRU ABF10U
SINGLE PHASE 1.0AMP SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER
Features
· Glass passivated die construction
· Low forward voltage drop
· High current capability
· High surge current capability
· Designed for surface mount application
· Plastic material-UL flammability 94V-0
0.165(4.2)
0.150(3.8)
0.268(6.8)
0.236(6.0)
ABF
0.010(0.25)
0.006(0.15)
0.268(6.8)
0.236(6.0)
0.181(4.6)
0.165(4.2)
Mechanical Data
· Case: SOPA-4, molded plastic ABF
· Terminals: plated leads solderable per
MIL-STD-202, Method 208
0.032(0.7)
0.024(0.5)
· Polarity: as marked on case
· Mounting position: Any
· Marking: type number
0.209(5.3)
0.189(4.8)
0.051(1.3)
0.039(1.0)
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ ambient temperature unless otherwise specified.
Single Phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
TYPE NUMBER
SYMBOL ABF2U ABF4U
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
VRRM
VRWM
200
400
VDC
VRMS
140
280
ABF6U
600
420
ABF8U ABF10U UNITS
800
1000
V
560
700
V
Average Rectified Output Current @TA=30℃
IO
1.0
A
Non-Repetitive Peak Forward Surge Current 8.3ms
Single half sine-wave superimposed on rated load
(JEDEC Method)
Forward Voltage per element @IF=1.0A
Peak Reverse Current
@TA =25℃
At Rated DC Blocking Voltage _@TA _{=125 ℃}
Typical Thermal Resistance per leg _{(Note 1)}
Operating and Storage Temperature Range
IFSM
VFM
IR
RθJA
RθJL
TJ,TSTG
35
1.1
5.0
500
62.5
25
-55to+150
A
V
uA
℃/W
℃
Note:1.Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.
version:01
1 of 2
www.dyelec.com