A21 Datasheet, PDF (1/2 Pages) DIYI Electronic Technology Co., Ltd. – SINGLE PHASE 2.0AMP SURFACE MOUNT GLASS PASSIVATED RECTIFIER

A21 THRU A27
SINGLE PHASE 2.0AMP SURFACE MOUNT GLASS PASSIVATED RECTIFIER
Features
· Glass passivated die construction
· Ideal for surface mouted applications
· Low reverse leakage
· Metallurgically bonded construction
· High temperature soldering guaranteed:
260℃/10 seconds,0.375"(9.5mm) lead length,
5 lbs. (2.3kg) tension
· Plastic material-UL flammability 94V-0
0.079(2.0)
0.063(1.6)
SOD-123FL
8°(8°)
2°(2°)
Mechanical Data
· Case: SOD-123FL, molded plastic
· Terminals: plated leads solderable per
MIL-STD-750, Method 2026
· Polarity: Color band denotes cathode end
· Mounting position: Any
0.150(3.8)
0.134(3.4)
0.047(1.2)
0.032(0.8)
0.037(0.95)
0.022(0.55)
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ ambient temperature unless otherwise specified.
Single Phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
TYPE NUMBER
SYMBOL A21 A22 A23 A24 A25 A26 A27 UNITS
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
VRRM
VRWM
50
100
200
400
600
800 1000 V
VDC
VRMS
35
70
140
280
420
560
700
V
Average Rectified Output Current @TL =75 ℃
IO
2.0
A
Non-Repetitive Peak Forward Surge Current
8.3ms
Single half sine-wave superimposed on rated load
IFSM
(JEDEC Method)
Forward Voltage per element @IF=2.0A
VFM
Peak Reverse Current
@TA =25℃
At Rated DC Blocking Voltage @TA =100 ℃
IR
Typical thermal resistance (NOTE 1)
Typical junction capacitance (NOTE 2)
Operating and Storage Temperature Range
RθJA
CJ
TJ,TSTG
50
1.1
5.0
100
180
4
-55to+150
A
V
uA
℃/W
pF
℃
Note:1.Thermal resistance from junction to ambient at 0.375" (9.5mm)lead length,P.C.B. mounted
2. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.
version:01
1 of 2
www.dyelec.com