SH1016TR Datasheet, PDF (3/3 Pages) Dubilier – CAPACITORS TANTALUM DIPPED SH

CAPACITORS
OUTLINE DRAWING
TANTALUM DIPPED SH
4
DIMENSIONS (mm)
Code
Description
Po
Feed hole pitch
P
Hole centre to component centre
S
Lead pitch

H
Height to seating plane
Do
Feed hole diameter
W
Tape width
Dimensions/mm
12.7 ± 0.3
6.35 ± 0.4
5.0 + 0.8/-0.2
(2.5 + 0.4/-0.1 option)
16.0 ± 0.5
4.0 ± 0.2
18.0 + 1.0/-0.5
CHARACTERISTICS
DC leakage current (DCL) increases with increasing
temperature according to the typical curve
Capacitance typically changes with temperature
according to the curve
10.0
Reference 1.0
at + 25 ˚C
1.0
+20
+10
0
-10
-20
-80 -60 -40 -20 0 +20 +40 +60 +80 +100 +120
Operating Temperature ˚C
0.1
-60 -40 -20 0 +20 +40 +60 +80 +100 +125
Operating Temperature –˚C
Typical Effect of Temperature
upon DC Leakage Current
Optimum Solder Wave Profile
Flux Zone
250
225
200
175
150
125
100
75
Solder Wave Peak
Temperature 260 °C
Entrance to Solder Wave
Exit from Solder Wave
(Time in Wave – 2 to 4 Secs.)
Preheat Zone
Hot Air Debridging
80°C
to 120 °C
Entrance
to Solder
Machine
Bottom Side
Temperature
Range
150°C
Max.
Exit from
Solder
Machine
F_Fr_re_eee
AAiirr
Entrance to
In-Line Cleaner
CCoooll
Exit from
In-Line Cleaner
(time in cleaner
may be less)
Immersion in
Cleaning
Vapor
50
Top Side
Nominal
25
0
1
2
3
4
5
6
Time (Minutes)
108
Fax: [phone] www.dubilier.co.uk Tel: [phone]