RN164102J_11 Datasheet, PDF (1/1 Pages) Dubilier – SURFACE MOUNT THICK FILM RESISTOR NETWORK RN16

SURFACE MOUNT
1/16W Rated
Saves placement time
-55°C - 125°C
Industry standard size
THICK FILM RESISTOR NETWORK RN16
SPECIFICATION
Power rating at 70°
Operating Temp. Range
Derated at zero load at
Maximum Working Voltage
Maximum Overload Voltage
Resistance Range
Temperature Coefficient
Resistance Tolerance
1/16W
-55°C to +125°C
+125°C
50v
100v
10Ω - 1M
±200ppm/°C
±5% and ±1%
ENVIRONMENTAL CHARACTERISTICS
Performance Test
Temperature Coefficient
Thermal Shock
Low Temperature Operation
Short Time Overload
High Temperature Exposure
Resistance to Soldering Heat
Moisture Resistance
Life
Solderability
Bending Strength
Test Method
MIL-STD-202F, Method 304
—55°C to + 125°C
MIL-STD-202F, Method 107
5 cycles, —55°C to +125°C
MIL-R-55342D, Para.4.7.4
1 hour at —65°C followed by 45 minutes RCWV
MIL-R-55342D, Para.4.7.5
2.5 times RCWV for 5 seconds
MIL-R-55342D, Para.4.7.6
125°C for 100 hours
MIL-R-55342D, Para.4.7.7
Soldered to test board at 260°C for 10 secs
MIL-STD-202F, METHOD 106
10 cycles. Total 240 hours
MIL-STD-202F, Method 108A
1000 hours at 70°C RCWV intermittent
MIL-STD-202F, Method 208
260°C for 10 seconds coverage
JIS-C-5202, Para.6.1.4
Unit mounted in centre of 90mm board
length deflected 5mm in either direction
for 10 seconds
Appraise
±200ppm/°C
±(1%+0.05Ω)
±(1%+0.05Ω)
±(1%+0.05Ω)
±(1%+0.05Ω)
±(1%+0.05Ω)
±(2%+0.05Ω)
±(2%+0.05Ω)
95% min.
±(1%+0.05Ω)
ORDERING INFORMATION
RN16
4
102
J
Series
No. of
Value
Tolerance
Resistors
J = 5%
F = 1%
OUTLINE DRAWING
0.5±0.15
0.5±0.15
0.3±0.15
0.8±0.05
0.5±0.1
3.20±0.2
Dimen^0.s³i^±o^0.n¹⁵s in mm
0.8±0.05
0.5±0.1
SCHEM^3.A²⁰T^±0I^.2CS
n=4
n=4
1.6±0.2
0.3±0.15
1.6±0.2
0.3±0.15
R₁
R_{1 R2}
R₂
R_{Rn n}
142
www.dubilier.co.uk