DSHX33010TA Datasheet, PDF (1/3 Pages) Dubilier – CAPACITORS LOW IMPEDANCE AND LOW ESR DSHX

CAPACITORS
RODUC
NEW
For high frequency
Up to 6000 hours @ 105°C
-40 to +105°C
Suited for switching applications
Other case sizes available on request
LOW IMPEDANCE AND LOW ESR DSHX
SPECIFICATION
Item
Electrical Characteristics
Operating Temperature Range
Rate Working Voltage Range
Rate Capacitance Range
Capacitance Tolerance
DC Current Leakage (µA)
-40° to +105°C
6.3 to 50V
1 to 15000µF
-20 to +20%
I = 0.01 CV or 3(µA) whichever is greater.
( Measurements shall be Made After a 2 Minute Charge at Rated Working Voltage )
Dissipation Factor: at 120 Hz, 25°C
WV (V)
6.3 10 16 25 35
Load Life
D.F (%)
22 19 16 14 10
For capacitor whose capacitance exceeds 1000µF. The value of D.F(%)
is increased by 2% for every addition of 1000µF.
WV (V)
6.3 10 16 25 35 50
Impedance: Z–25°C / Z+20°C 4 3 2 2 2 2
Impedance: Z–40°C / Z+20°C 8 6 4 3 3 3
Dø: 5ø to 6.3ø 8ø to 10øx12 10øx15 to10øx30 12ø to 18ø
Life 3000hrs 4000hrs
5000hrs
6000hrs
If dimension is down size, Endurance will be less 1000hrs than standard.
(a)Capacitance Change : Within 20% of Initial Value
(b)Dissipation Factor : NotExceed200% of Initial Requirement
(c)Leakage Current : NotExceed the Initial Requirement
Shelf Life
Shelf Life : 500 Hours, No Voltage Applied, at 105°C
(a)Capacitance Change : Within 25% of Initial Value
(b)Dissipation Factor : Not Exceed 200% of Initial Requirement
(c)Leakage Current : Not Exceed 200% Initial Requirement
ORDERING INFORMATION
DSHX
Series
330
Capacitance
10
Voltage
/TA
Options
Blank = loose
TA = Tape and
Ammo
TA = 5mm pitch
For others add pitch eg. TA2mm = 2mm pitch
60
Fax: [phone] www.dubilier.co.uk
Tel: [phone]