English
Language : 

DSH Datasheet, PDF (1/4 Pages) Schurter Inc. – Storage Choke, high design
CAPACITORS
Very low impedance
6.3V - 100V
-55°C - 105C°
Long life up to 5000 hrs
Suitable for PSU applications
ULTRA LOW IMPEDANCE DSH
SPECIFICATION
Operating temperature range
Rated Working Voltage Range
Rated Capacitance Range
Capacitance Tolerance
Maximum Leakage Current
At 20°C
e -55°C +105°C
g 6.3 ~ 100Vdc
0.47 ~ 12,000µF
n ±20% (M)
a 0.03CV, or 4µA, whichever is greater (after 1 minute)
R 0.01CV or 3µA, whichever is greater (after 2 minutes)
Surge Voltage (S.V.)
Maximum Tan ∂ At 20°C & 120Hz
W.V. (Vdc)
S.V. (Vdc)
X Tan ∂ C ≤ 1200µF
H Tan ∂ C = 1500µF
Tan ∂ C = 1800µF
S Tan ∂ C = 2200µF
Tan ∂ C = 2700µF
D Tan ∂ C = 3300µF
yTan ∂ C = 3900µF
bTan ∂ C = 4700µF
6.3 10
8 13
0.22 0.19
0.23 0.20
0.23 0.20
0.24 0.21
0.25 0.22
0.26 0.23
0.28 0.25
0.29 0.26
16
20
0.16
0.17
0.17
0.18
0.19
0.20
0.22
0.23
25
32
0.14
0.15
0.15
0.16
0.17
0.18
0.20
0.21
35
44
0.12
0.13
0.13
0.14
0.15
0.16
50 63 100
63 79 125
0.10 0.08 0.07
0.11
0.11
Tan ∂ C = 5600µF 0.31 0.28 0.25
Tan ∂ C = 6800µF 0.33 0.30 0.27
d Tan ∂ C = 8200µF 0.36 0.33
e Tan ∂ C = 10000µF 0.40
d Tan ∂ C = 12000µF 0.44
Low Temperature Stability
e (Impedance Ratio at 120H2)
W.V. (Vdc)
Z-40°C/Z+20°C
6.3 10 ~ 100
3
2
s Z-55°C/Z+20°C 4
3
r Capacitance Change at -55°C
∆C/C(-55/+20°C)(%) ±30% ±20%
e Load Life Test
p at 105°C
u Shelf Life Test
5,000 hrs : 12.5Ø~
3,000 hrs : 8 ~ 10Ø
2,000 hrs : 5 ~ 6.3Ø
Capacitance Change
Capacitance Change
Tan ∂
Leakage current
Within ±20% of initial value
Less than 200% of specified maximum value
Less than specified maximum value
Within ±20% of initial value
S1,000 hours at 105°C
Tan ∂
Less than 200% of specified maximum value
without load
Leakage current
Less than specified maximum value
ORDERING INFORMATION
DSH
Series
DSH or DSHS
for small size
330
Capacitance
µF
10
Voltage
TA, TR = 5mm pitch
For others add pitch e.g. TA2MM = 2mm pitch
/TA
Options
Blank = Loose
TA = Tape Ammo
TR = Tape Reel
54
www.dubilier.co.uk