DBCPJ0217T-1.3 Datasheet, PDF (1/1 Pages) Dubilier – AUDIO SMT DC JACK SOCKET

AUDIO
Competitively priced
Industry compatible
Surface Mount
SMT DC JACK SOCKET
SPECIFICATION
Contact resistance (DCR 0.1A)
1, Initial, before any testing:

2, After life test with mating plug:

Insertion Force:
Extraction Force:
Soldering Heat:
Operating Temperature range:
Insulating Resistance:
Voltage Test:
Lifetime:
Rated Voltage:
Rated Current:
(1) Between the terminals (NC): 30mΩ
(2) Plug to sleeve, tip, ring (NO) contact: 50mΩ
(1) Between the terminals (NC): 60mΩ
(2) Plug to sleeve, tip, ring (NO) contact: 100mΩ
0.3kg - 1.5kg
Terminals must withstand a 500g minimum pull for 10 seconds
0.3kg - 1.5kg
before movement or break from housing occurs
Terminal for PC board temperature: 260+ 5˚C for 5 + 1.0 seconds
-25˚C to 80˚C
More than 100MΩ by 500v DC at 90-95% RH, 40˚C
Withstand 0.5mA 500v AC between any open terminal for one minute
Withstand more than 5000 cycle’s insertion and withdrawal with testing plug
16vdc
20mA - 0.3A
OUTLINE DRAWING
10.8
8.0
8.0
9.3
2.7
A
1
2
1
3
Ø1.0
5.0
3.7
2.8
ORDERING INFORMATION
DBC
Dubilier
Connectors
PJ
DC Jack
Socket
Connector
0217T
Series
-1.3
1.3 = 1.3mm
1.0 = 1.0mm
4.0
Ø 3.8
1
3
2
159
Fax: [phone] www.dubilier.co.uk Tel: [phone]