DBCEJ0359.2T Datasheet, PDF (1/1 Pages) Dubilier – AUDIO PCB 3.5 EARPHONE JACK

AUDIO
Competitively priced
Industry Compatible
PCB Mounting or Wire Soldering
Thread mounting option
PCB 3.5Ø EARPHONE JACK
SPECIFICATION
Contact resistance (DCR 0.1A)
1, Initial, before any testing:

2, After life test with mating plug:

Insertation Force:
Extraction Force:
Soldering Heat:
Operating Temperature range:
Insulating Resistance:
Voltage Test:
Lifetime:
Rated Voltage:
Rated Current:
OUTLINE DRAWING
(1) Between the terminals (NC): 30mΩ
(2) Plug to sleeve, tip ,ring (NO) contact: 50mΩ
(1) Between the terminals (NC): 60mΩ
(2) Plug to sleeve, tip, ring (NO) contact: 100mΩ
0.3kg - 2.0kg
Terminals must withstand a 500g minimum pull for 10 seconds
0.3kg - 2.0kg
before movement or break from housing occurs
Terminal for PC board temperature: 260 ± 5˚C for 5 ± 1.0 seconds
-25˚C to 80˚C
More than 100mΩ by 500v DC at 90 - 95% RH, 40˚C
Withstand 0.5mA 500v AC between any open terminal for one minute
Withstand more than 5000 cycle’s insertion and withdrawal with testing plug
16vdc
20mA - 0.3A
or
M6 THREAD
5.0
ORDERING INFORMATION
DBC
Dubilier
Connectors
EJ
3.5Ø Earphone
Socket
Connector
0359
Series
Thread
Blank = Without
Thread
T = Thread
-2T
Contacts
-2T
-3RT
-3TS
-4R
-4T
--5
146
Fax: [phone] www.dubilier.co.uk
Tel: [phone]