CLLA Datasheet, PDF (1/2 Pages) Dubilier – ALUMINIUM ELECTROLYTIC LOW - LEAKAGE CURRENT

CAPACITORS
Miniature case sizes
Very low-leakage current
Extremely low stable leakage current characteristics
Close capacitance tolerance ± 20% (± 10% available)
The CLLA is a radial electrolytic capacitor offering very low-leakage
currents.
Typical applications include audio and timing circuits.
Product is available loose, taped & boxed.
ALUMINIUM ELECTROLYTIC LOW - LEAKAGE CURRENT CLLA
SPECIFICATION
Item
Operating Temperature Range
Rated Working Voltage Range
Nominal Capacitance Range
Capacitance Tolerance
Leakage Current
tan ∂
(120Hz +20°C)
High Temperature Loading
Shelf Life
Performance Characteristics
-40 to +105˚C
10 to 50V DC
0.1 to 220µF
± 20% (± 10% on request)
I ≤ 0.002CV or 0.3[µA] whichever is greater after 2 minutes (30 sec: ≤ 10µF)
application of rated working voltage at +20˚C
Working voltage [V] 10 16 25 50
*0.06 for C ≤ 1µF
tan ∂
max. 0.17 0.13 0.10 *0.08
Test Conditions
Duration
2000 hours
Applied voltage
Rated DC working voltage
Ambient temperature
+105˚C
Post Test Requirements at +20˚C
Leakage current
≤ Initial specified value
Capacitance change
≤ ± 20˚C of initial measured value
tan ∂
≤ 150% of initial specified value
Test Conditions
Duration
500 hours
Ambient temperature
+105˚C
Applied voltage
(None)
Post Test Requirements at +20˚C
Leakage current
≤ initial specified value
Capacitance change
≤ ± 20% of initial measured value
tan ∂
≤ 150% of initial specified value
*Pre-treatment for measurements.
Measurements shall be conducted after application of DC working voltage
for 30 minutes.
ORDERING INFORMATION
CLLA
Range
10
Capacitance
16
Voltage
TA
Options
TA = 5mm Tape/Ammo box
For others add pitch e.g. TA 2mm = 2mm pitch
Blank = Loose
46
www.dubilier.co.uk