GL41A Datasheet, PDF (1/2 Pages) First Components International – 1.0 Amp MEGARECTIFIERS

Diode Semiconductor Korea
GL41A---GL41Y
SURFACE MOUNT
RECTIFIERS
FEATURES
◇ Plastic package has underwriters laboratories
flammability classification 94V-0
◇ Glass passivated chip junction
◇ For surface mount applications
◇ High temperature metallurgically bonded construction
◇ Cavity-free glass passivated junction
◇ High temperature soldering guaranteed:450 ℃/5
seconds at terminals.Complete device sub-mersible
temperature of 265℃ for 10 seconds in solder bath
MECHANICAL DATA
◇ Case: JEDEC DO-213AB,molded plastic
◇ Terminals: Axial lead ,solderable per
MIL- STD-750,Method 2026
◇ Polarity: Color band denotes cathode
◇ Weight: 0.0046 ounces, 0.116 grams
◇ Mounting position: Any
VOLTAGE RANGE: 50 --- 1000 V
CURRENT: 1.0 A
DO - 213AB
SOLDERABLE ENDS
D2=D1^{ĐĒ00.20}
D2
0.5± 0.1
4.9± 0.2
0.5± 0.1
Dimensions in millimeters
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25℃ ambient temperature unless otherwise specified.
Single phase,half wave,60 Hz,resistive or inductive load. For capacitive load,derate current by 20%.
Maximum recurrent peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current
(see FIG.1)
V_RRM
V_RMS
V_DC
I_(AV)
GL
41A
GL
41B
GL
41D
GL
41G
GL
41J
GL
41K
GL
41M
GL
41T
GL
41Y
UNITS
50 100 200 400 600 800 _{1000 1300 1600} V
35 70 140 280 420 560 700 910 1120 V
50 100 200 400 600 800 _{1000 1300 1600} V
1.0
A
Peak forward surge current
8.3ms single half-sine-wave
I_FSM
30
A
superimposed on rated load (JEDEC Method)
Maximum instantaneous forward voltage
@1.0A
V_F
1.1
1.2
V
Maximum reverse current
@T_A=25℃
at rated DC blocking voltage @T_A=125℃
Typical junction capacitance (Note1)
Typical thermal resistance (Note 2)
Operating junction temperature range
Storage temperature range
I_R
C_j
R_θJA
T_j
T_STG
10
50
8.0
75
- 55 ---- +175
- 55 ---- +175
NOTE: 1. Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
2. Thermal resistance from junction to ambient, 0.24×0.24"(6.0×6.0mm) copper pads to each terminal.
µA
pF
℃/W
℃
℃
www.diode.kr