DDX-XJS Datasheet, PDF (3/16 Pages) DOMINANT Semiconductors – High brightness surface mount LED

DOMINANT ^TM
Opto Technologies
Innovating Illumination
Optical Characteristics at Tj=25˚C
Part Ordering
Number
Color
DDG-CJS-PQ2-1
Green, 572nm
AllnGaP : DDx-xJS
Viewing
Angle˚
120
Luminous Intensity @ 20mA IV (mcd)
Min.
Typ.
Max.
45.00
71.50
112.50
DDG-CJS-QR2-1
Green, 572nm
120
71.50
112.50
180.00
DDG-SJS-QR2-1
Green, 572nm
120
71.50
112.50
180.00
DDP-CJS-LM2-1
Pure Green, 560nm
120
11.20
18.00
28.50
DDP-SJS-LM2-1
Pure Green, 560nm
120
11.20
18.00
28.50
DDP-SJS-MN2-1
Pure Green, 560nm
120
18.00
28.50
45.00
Not for new design
NOTE
1. All part number above comes in a quantity of 2000 units per reel.
2. Other luminous intensity groups are also available upon request.
3. Luminous intensity is measured with an accuracy of ± 11%.
4. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel.
5. An optional Vf binning is also available upon request. Binning scheme is as per following table.
Electrical Characteristics at Tj=25˚C
Part Number
DDH-CJS, DDS-CJS, DDR-CJS, DDA-CJS,
DDO-CJS, DDY-CJS, DDG-CJS, DDP-CJS
Vf @ If = 20mA
Min. (V) Typ. (V) Max. (V)
1.6
1.9
2.3
DDS-SJS, DDR-SJS, DDA-SJS, DDO-SJS,
1.6
1.8
2.3
DDY-SJS, DDG-SJS, DDP-SJS
DDR-TJS, DDY-TJS
1.6
2.1
2.6
Forward voltage, Vf is measured with an accuracy of ± 0.1 V.
Vr @ Ir = 10uA
Min. (V)
12
12
12
3
03/01/2013 V20.0