DDX-PJS Datasheet, PDF (2/13 Pages) DOMINANT Semiconductors – High brightness surface mount LED

DOMINANT ^TM
Opto Technologies
Innovating Illumination
AllnGaP : DDx-PJS
Optical Characteristics at Tj=25˚C
Part Ordering
Number
Color
DDS-PJS-U2V-1
DDR-PJS-VW1-1
Super Red, 632nm
Red, 622 nm
DDA-PJS-V2W-1
Amber, 615 nm
Viewing
Angle˚
120
120
120
Luminous Intensity @ 20mA IV (mcd)
Min.
Typ.
Max.
560.0
843.0
1125.0
715.0
1058.0
1400.0
900.0
1350.0
1800.0
DDY-PJS-V2W-1
Yellow, 590 nm
120
900.0
1350.0
1800.0
NOTE
1. All part number above comes in a quantity of 2000 units per reel.
2. Other luminous intensity groups are also available upon request.
3. Luminous intensity is measured with an accuracy of ± 11%.
4. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel.
5. An optional Vf binning is also available upon request. Binning scheme is as per following table.
Electrical Characteristics at Tj=25˚C
Part Number
Vf @ If = 20mA
Min. (V) Typ. (V) Max. (V)
DDx-PJS
1.8
2.1
2.6
Forward voltage, Vf is measured with an accuracy of ± 0.1 V.
Vr @ Ir = 10uA
12
Min. (V)
Absolute Maximum Ratings
DC forward current
Peak pulse current;
(tp ≤ 10µs, Duty cycle = 0.10)
Reverse voltage; Ir (max) = 10µA
ESD threshold (HBM)
LED junction temperature
Operating temperature
Storage temperature
Power dissipation (at room temperature)
Thermal resistance
- Junction / ambient, R_{th JA}
- Junction / solder point, R_{th JS}
(Mounting on FR4 PCB, pad size >= 16 mm² per pad)
2
Maximum Value
50
100
12
2
120
-40 … +115
-40 … +125
130
360
150
Unit
mA
mA
V
kV
˚C
˚C
˚C
mW
K/W
K/W
30/10/2015 V6.0