DDX-LJB Datasheet, PDF (2/13 Pages) DOMINANT Semiconductors – High brightness surface mount LED using thin film technology

DOMINANT ^TM
Opto Technologies
Innovating Illumination
AlInGaP : DDx-LJB
Optical Characteristics at Tj=25˚C
Part Ordering
Number
Color
Viewing
Angle˚
Luminous Intensity @ IF = 20mA IV (mcd)
Min.
Typ.
Max.
DDY-LJB-VW2-1
Yellow, 587nm
120
715.0
1125.0
1800.0
NOTE
1. All part number above comes in a quantity of 2000 units per reel.
2. Luminous intensity is measured with an accuracy of ± 11%.
3. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel.
4. An optional Vf bining is also available upon request. Bining scheme is as per following table.
Electrical Characteristics at Tj=25˚C
Part Number
Vf @ If = 20mA
Min. (V)
Typ. (V)
Max. (V)
DDx-LJB
1.8
2.1
2.6
Forward voltages are measure using a current pulse of 1 ms and with an accuracy of ± 0.1V.
Vr @ Ir = 10uA
Min. (V)
5
Absolute Maximum Ratings
DC forward current
Peak pulse current; (tp ≤ 10µs, Duty cycle = 0.10)
Reverse voltage
ESD threshold (HBM)
LED junction temperature
Operating temperature
Storage temperature
Power dissipation (at room temperature)
Thermal resistance
- Junction / ambient, R_{th JA}
- Junction / solder point, R_{th JS}
(Mounting on FR4 PCB, pad size >= 16 mm² per pad)
2
Maximum Value
30
80
5
2
120
-40 … +100
-40 … +100
80
500
280
Unit
mA
mA
V
kV
˚C
˚C
˚C
mW
K/W
K/W
26/11/2014 V1.0