DDR-GJS-J2 Datasheet, PDF (2/8 Pages) DOMINANT Semiconductors – LED GaP

DOMINANT Semiconductors
Part Ordering Number
DDR-GJS-J2L1-1-I1
• DDR-GJS-J2
• DDR-GJS-K1
• DDR-GJS-K2
• DDR-GJS-L1
DDO-GJS-H2K1-1-I1
• DDO-GJS-H2
• DDO-GJS-J1
• DDO-GJS-J2
• DDO-GJS-K1
DDY-GJS- H2K1-1-I1
• DDY-GJS-H2
• DDY-GJS-J1
• DDY-GJS-J2
• DDY-GJS-K1
DDG-GJS- KL2-1-I1
• DDG-GJS-K1
• DDG-GJS-K2
• DDG-GJS-L1
• DDG-GJS-L2
DDP-GJS-GH2-1-I1
• DDP-GJS-G1
• DDP-GJS-G2
• DDP-GJS-H1
• DDP-GJS-H2
Chip Technology /
Color
GaP /
Red, 625 nm
GaP /
Orange, 605 nm
GaP /
Yellow, 587 nm
GaP /
Green, 570 nm
GaP /
Green, 560 nm
Luminous Intensity @ If = 10mA
Iv ( mcd )
5.6 … 14.0
5.6 … 7.2
7.2 … 9.0
9.0 … 11.2
11.2 … 14.0
3.55 … 9.0
3.55 … 4.5
4.5 … 5.6
5.6 … 7.2
7.2 … 9.0
3.55 … 9.0
3.55 … 4.5
4.5 … 5.6
5.6 … 7.2
7.2 … 9.0
7.2 … 18.0
7.2 … 9.0
9.0 … 11.2
11.2 … 14.0
14.0 … 18.0
1.80 … 4.50
1.80 … 2.24
2.24 … 2.80
2.80 … 3.55
3.55 … 4.50
NOTE:
1. All part number above comes in a quantity of 2000 units per reel.
2. Luminous intensity is measured with an accuracy of ±11%.
3. Wavelength binning is carried for all units as per the wavelength-binning table. Only one
wavelength group is allowed for each reel.
30/04/04
DomiLED Gap DDx-GJS -I1 Catalogue-v3.doc
Page 2 of 2