SMBJ5.0 Datasheet, PDF (1/3 Pages) Littelfuse – Silicon Avalanche Diodes - 600W Surface Mount Transient Voltage Suppressors

SMBJ5.0 THRU SMBJ170CA
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
Stand - Off Voltage - 5.0 to 170 Volts Peak Pulse Power - 600 Watt
FEATURES
● Glass Passivated Die Construction
● Uni- and Bi-Directional Versions Available
● Excellent Clamping Capability
● Plastic Case Material has UL Flammability
Classification Rating 94V-O
● Typical IR less than 1μA above 10V
● Fast Response Time : typically less than 1.0ns from 0v to VBR
MECHANICAL DATA
● Case: JEDEC SMB(DO-214AA), Molded Plastic
● Terminals: Solder Plated, Solderable
per MIL-STD-750, Method 2026
● Polarity: Cathode Band Except Bi-Directional
● Marking: Device Code
● Weight: 0.093 grams (approx.)
SMB ( DO-214AA )
.083(2.11)
.075(1.91)
.155(3.94)
.130(3.30)
.185(4.70)
.160(4.06)
.096(2.44)
.084(2.13)
.060(1.52)
.030(0.76)
.220(5.59)
.200(5.08)
.012(.305)
.006(.152)
.008(.203)
.002(.051)
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics @T_A=25°C unless otherwise specified
Characteristic
Symbol
Value
Unit
Peak Pulse Power Dissipation 10/1000µS Waveform (Note 1, 2) Figure 3
PPPM
600 Minimum
W
Peak Pulse Current on 10/1000µS Waveform (Note 1) Figure 4
Peak Forward Surge Current 8.3ms Single Half Sine-Wave
Superimposed on Rated Load (JEDEC Method) (Note 2, 3)
IPPM
See Table 1
A
I FSM
100
A
Operating and Storage Temperature Range
Tj, TSTG
-55 to +150
°C
Note: 1. Non-repetitive current pulse per Figure 4 and derated above T_A = 25°C per Figure 1.
2. Mounted on 5.0mm² (0.013mm thick) land area.
3. Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minutes maximum.