P6KE6.8 Datasheet, PDF (1/3 Pages) Daesan Electronics Corp. – POWER 600Watts VOLTAGE 6.8 to 440 Volts

P6KE6.8(C)A THRU P6KE440(C)A
TRANSIENT VOLTAGE SUPPRESSOR
Stand - Off Voltage - 6.8 to 440 Volts Peak Pulse Power - 600 Watt
FEATURES
● Glass Passivated Die Construction
● Uni- and Bi-Directional Versions Available
● Excellent Clamping Capability
● Fast Response Time
● High Temperat Soldering Guaranteed : 265 C/10 sec/.375."
(9.5mm) Lead Length, 51bs., (2.3kg) Tension
MECHANICAL DATA
● Case: JEDEC DO-15 molded Plastic
● Terminals: Axial Leads, Solderable
per MIL-STD-750, Method 2026
● Polarity: Cathode Band Except Bi-Directional
● Marking: Any
● Weight: 0.4grams(approx), 0.015ounce
DO-15
0.140(3.6)
0.104(2.6)
DIA.
1.0 (25.4)
MIN.
0.300(7.6)
0.230(5.8)
0.034(0.9)
0.028(0.7)
DIA.
1.0 (25.4)
MIN.
“C” Suffix Designates Bi-directional Devices
“A” Suffix Designates 5% Tolerance Devices
No Suffix Designates 10% Tolerance Devices
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics @T_A=25°C unless otherwise specified
Characteristic
Symbol
Value
Unit
Peak Pulse Power Dissipation 10/1000µS Waveform (Note 1, 2) Figure 3
PPPM
600 Minimum
W
Peak Pulse Current on 10/1000µS Waveform (Note 1) Figure 4
Peak Forward Surge Current 8.3ms Single Half Sine-Wave
Superimposed on Rated Load (JEDEC Method) (Note 2, 3)
IPPM
See Table 1
A
IFSM
100
A
Operating and Storage Temperature Range
Tj, TSTG
-55 to +175
°C
Note: 1. Non-repetitive current pulse per Figure 4 and derated above T_A = 25°C per Figure 1.
2. Mounted on 5.0mm² (0.013mm thick) land area.
3. Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minutes maximum.