MBR3030PT Datasheet, PDF (1/2 Pages) Diodes Incorporated – 30A SCHOTTKY BARRIER RECTIFIER

MBR3030PT THRU MBR30100PT
SCHOTTKY BARRIER RECTIFIER
Reverse Voltage - 30 to 100 Volts Forward Current - 30.0 Ampere
FEATURES
● Plastic package has Underwriters Laboratory Flammability
Classification 94V-0
● Dual rectifier construction, positive center tap
● Metal silicon junction, majority carrier conduction
● Low power loss, high efficiency
● Guardring for overvoltage protection
● For use in low voltage, high frequency inverters, free wheeling,
and polarity protection applications
MECHANICAL DATA
Case: TO-3P, Molded Plastic
Terminals: Plated Leads Solderable per
MIL-STD-750, Method 2026
Polarity: See Diagram
Weight: 5.6 grams (approx.)
Mounting Position: Any
Mounting Torque: 11.5 cm-kg (10 in-lbs) Max.
TO-3P
15.8± 0.2
8.0± 0.2
3.6± 0.15
5.0± 0.15
2.0± 0.15
PIN
1
2
3
3.0± 0.1
2.2± 0.15
1.2± 0.15
5.4± 0.15
0.6± 0.1
Dimensions in millimeters
PIN 1 -
PIN 3 -
2.4± 0.2
+
Case, PIN 2
Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified
Single Phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
Average Rectified Output Current
@TC = 95°C
Non-Repetitive Peak Forward Surge Current 8.3ms
Single half sine-wave superimposed on rated load
(JEDEC Method)
Forward Voltage
Peak Reverse Current
At Rated DC Blocking Voltage
@IF = 15A
@TA = 25°C
@TA = 100°C
Typical Junction Capacitance (Note 1)
Typical Thermal Resistance Junction to Case (Note 2)
Operating and Storage Temperature Range
S ymbol
MBR MBR MBR MBR MBR MBR MBR MBR
3030PT 3035PT 3040PT 3045PT 3050PT 3060PT 3080PT 30100PT
Unit
VRRM
VRWM
30
35
40
45
50
60
80 100
V
VR
VR(RMS) 21 25 28 32 35 42 56 70
V
IO
30
A
IFSM
275
A
VFM
IRM
Cj
R�JC
Tj, TSTG
0.55
0.65
1.0
60
1100
1.4
-65 to +150
0.85
V
mA
pF
° C/W
°C
Note: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.
2. Thermal resistance junction to case mounted on heatsink.