KBL4005 Datasheet, PDF (1/2 Pages) Daesan Electronics Corp. – CURRENT 4.0 Amperes VOLTAGE 50 to 1000 Volts

KBL4005 THRU KBL407
SINGLE PHASE SILICON BRIDGE RECTIFIER
Reverse Voltage - 50 to 1000 Volts Forward Current - 4.0 Ampere
FEATURES
● Ideal for printed circuit board
● Surge overload rating: 150A peak
● High case dielectric strength
● High temperature soldering guaranteed:
260°C/10 seconds at 5lbs. (2.3kg) tension
KBL / RS
.768(19.5)
.728(18.5)
.587(14.9)
.547(13.9)
.640(16.3)
.600(15.2)
MECHANICAL DATA
● Case: UL-94 Class V-0 recognized Flame Retardant Epoxy
● Terminals: Plated leads solderable per
MIL-STD 202, method 208
● Mounting Position: Any
● Marking: Type Number
.052(1.3)DIA.
.048(1.2)TYP.
(.1795.00)MIN.
.087(2.2)
.071(1.8)
.220(5.6)
.180(4.6)
.256(6.5)
.236(6.0)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 C ambient temperature unless otherwise specified.
Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%.
Characteristic
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Symbol
KBL
4005
KBL
401
KBL
402
KBL
404
KBL
405
KBL
406
KBL
407
Unit
V RRM
VRWM
VR
50
100 200 400 600 800 1000
V
RMS Reverse Voltage
VR(RMS)
35
70
140 280 420 560 700
V
Average Rectified Output Current @T_C = 75°C
IO
4.0
A
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave superimposed on
I FSM
150
A
rated load (JEDEC Method)
Forward Voltage (per element)
@I_F = 2.0A
VFM
Peak Reverse Current
At Rated DC Blocking Voltage
@T_C = 25°C
@T_C = 100°C
IR
Rating for Fusing (t < 8.3ms) (Note 1)
I²t
1.1
V
10
µA
1.0
mA
166
A²s
Typical Thermal Resistance (Note 2)
R JC
19
K/W
Operating and Storage Temperature Range
Tj, TSTG
-65 to +150
°C
Note: 1. Non-repetitive for t > 1ms and < 8.3ms.
2. Thermal resistance junction to case per element mounted on PC board with 13.0x13.0x0.03mm thick land areas.