5.0SMDG5.0 Datasheet, PDF (1/3 Pages) Diotech Company. – SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

5.0SMDG5.0 THRU 5.0SMDG170A
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
Stand - Off Voltage - 5.0 to 170 Volts Peak Pulse Power - 5000 Watt
FEATURES
● Glass Passivated Die Construction
● Uni- and Bi-Directional Versions Available
● Excellent Clamping Capability
● Fast Response Time
● Plastic Case Material has UL Flammability
Classification Rating 94V-O
MECHANICAL DATA
● Case: DO-215AB(SMDG), Molded Plastic
● Terminals: Solder Plated, Solderable
per MIL-STD-750, Method 2026
● Polarity: Cathode Band Except Bi-Directional
● Marking: Device Code
● Weight: 0.21 grams (approx.)
DO-215AB (SMDG)
0.125 (3.17)
0.115 (2.92)
Cathode Band
Mountin g Pad Layout
0.310 (7.87)
0.245 (6.22)
0.220 (5.59)
0.125 (3.17)
0.280 (7.11)
0.260 (6.60)
0.050 (1.27)
0.016 (0.41)
0.006 (0.15)
0.058 (1.47)
0.020
0.038 (0.97)
(0.51) Max.
0.400 (10.16)
0.380 (9.64)
0.095 (2.41)
0.075 (1.90)
0.008 (0.20)
0.002 (0.05)
0.040 (1.02)
0.024 (0.61)
Seating Plane
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics @T_A=25°C unless otherwise specified
Characteristic
Symbol
Value
Unit
Peak Pulse Power Dissipation 10/1000µS Waveform (Note 1, 2) Figure 3
PPPM
5000 Minimum
W
Peak Pulse Current on 10/1000µS Waveform (Note 1) Figure 4
Peak Forward Surge Current 8.3ms Single Half Sine-Wave
Superimposed on Rated Load (JEDEC Method) (Note 2, 3)
IPPM
See Table 1
A
IFSM
400
A
Operating and Storage Temperature Range
Tj, TSTG
-55 to +150
°C
Note: 1. Non-repetitive current pulse per Figure 4 and derated above T_A = 25°C per Figure 1.
2. Mounted on 5.0mm² (0.013mm thick) land area.
3. Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minutes maximum.