ZL9006M Datasheet, PDF (1/30 Pages) Intersil Corporation – Digital DC/DC PMBus 6A Power Module

Digital DC/DC PMBus 6A Power Module
ZL9006M
The ZL9006M is a 6A variable output, step-down
PMBus-compliant digital power supply. Included in the module
is a high-performance digital PWM controller, power MOSFETs,
an inductor, and all the passive components required for a
highly integrated DC/DC power solution. This power module has
built-in auto-compensation algorithms, which eliminates the
need for manual compensation design work. The ZL9006M
operates over a wide input voltage range and supports an
output voltage range of 0.6V to 3.6V, which can be set by
external resistors or via PMBus. Only bulk input and output
capacitors are needed to finish the design. The output voltage
can be precisely regulated to as low as 0.6V with ±1% output
voltage regulation over line, load, and temperature variations.
The ZL9006M functions as a switch mode power supply with
added benefits of auto compensation, programmable power
management features, parametric monitoring, and status
reporting capabilities.
The ZL9006M is packaged in a thermally enhanced, compact
(17.2mmx11.45mm) and low profile (2.5mm) over-molded
High-Density Array (HDA) package module suitable for
automated assembly by standard surface mount equipment.
The ZL9006M is Pb-free and RoHS compliant.
Figure 1 represents a typical implementation of the ZL9006M.
For PMBus operation, it is recommended to tie the Enable pin
(EN) to SGND.
Features
• Complete digital switch mode power supply
• Auto compensating PID filter
• ±1% Output Voltage Accuracy
• External synchronization
• Output voltage tracking
• Current sharing and phase interleaving
• Programmable sequencing (delay and ramp time)
• Snapshot™ parametric capture
• PMBus compliant
Applications
• Server, telecom, and datacom
• Industrial and medical equipment
• General purpose point of load
Related Literature
• See AN2033, “Zilker Labs PMBus Command Set - DDC
Products”
• See AN2034, “Configuring Current Sharing on the ZL2004
and ZL2006”
POWER-GOOD
OUTPUT
ENABLE
DGND
PG
EN
EXT SYNC
SYNC
DDC BUS
DDC
SCL
SDA
I²C/PMbus
SA
R_SA
R_SET
ZL9006M
VIN
(EPAD)
VOUT
(EPAD)
PGND
(EPAD)
FIGURE 1. TYPICAL APPLICATION CIRCUIT
V_IN
4.5V TO
13.2V
2x22µF
16V
V_OUT
C_OUT
RTN
2.5mm
17.2mm
*Patent pending package
FIGURE 2. SMALL FOOTPRINT PACKAGE
WITH LOW PROFILE AT 2.5mm
March 5, 2013
1
FN7959.0
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Copyright Intersil Americas LLC, 2013. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.