English
Language : 

Z1SMA1_16 Datasheet, PDF (1/3 Pages) Diotec Semiconductor – SMD Zener Diodes
Z1SMA1 ... Z1SMA100
Version 2016-03-21
~ SMA / ~ DO-214AC
5± 0.2
1± 0.3
Type
Typ
0.15
4.5± 0.3
Dimensions - Maße [mm]
Type: Zxx where xx = VZ
Typ: Zxx mit xx = VZ
Z1SMA1 ... Z1SMA100
SMD Zener Diodes
SMD Zener-Dioden
Ptot = 1 W
VZ = 1 V ... 100 V
Tjmax = 150°C
Typical Applications
Voltage stabilization and regulators
(For overvoltage protection – uni-
and bi-directional – or higher power
dissipation see TVS series P4SMA)
Commercial grade 1)
Typische Anwendungen
Spannungsstabilisierung und -regler
(Für Überspannungsschutz – uni-
und bidirektional – oder höhere
Verlustleistung s. TVS-Reihe P4SMA)
Standardausführung 1)
Features
VZ specified at 5 mA
VZ up to 100 V
Compliant to RoHS, REACH,
Conflict Minerals 1)
RoHS
Pb
Besonderheiten
VZ bei 5 mA spezifiziert
VZ bis zu 100 V
Konform zu RoHS, REACH,
Konfliktmineralien 1)
Mechanical Data 1)
Mechanische Daten 1)
Taped and reeled
7500 / 13“
Gegurtet auf Rolle
Weight approx.
0.07 g
Gewicht ca.
Case material
UL 94V-0
Gehäusematerial
Solder & assembly conditions
260°C/10s
Löt- und Einbaubedingungen
MSL = 1
Standard Zener voltage tolerance is graded to the international E 24 (~ ±5%) standard.
Other voltage tolerances and higher Zener voltages on request.
Die Toleranz der Zener-Spannung ist in der Standard-Ausführung gestuft nach der internationalen
Reihe E 24 (~ ±5%). Andere Toleranzen oder höhere Arbeitsspannungen auf Anfrage.
Maximum ratings 2)
Power dissipation – Verlustleistung
Operating junction temperature – Sperrschichttemperatur
Storage temperature – Lagerungstemperatur
TA = 50°C
Ptot
Tj
TS
Grenzwerte 2)
1 W 3)
-50...+150°C
-50...+175°C
Characteristics
Kennwerte
Thermal resistance junction to ambient air
Wärmewiderstand Sperrschicht – umgebende Luft
RthA
< 70 K/W 3)
Thermal resistance junction to terminal
Wärmewiderstand Sperrschicht – Anschluss
RthT
< 30 K/W
Zener voltages see table on next page – Zener-Spannungen siehe Tabelle auf der nächsten Seite
45
1 Please note the detailed information on our website or at the beginning of the data book
Bitte beachten Sie die detaillierten Hinweise auf unserer Internetseite bzw. am Anfang des Datenbuches
2 Tj = 25°C unless otherwise specified – Tj = 25°C wenn nicht anders angegeben
3 Mounted on P.C. board with 25 mm2 copper pads at each terminal
Montage auf Leiterplatte mit 25 mm2 Kupferbelag (Lötpad) an jedem Anschluss
4 Tested with pulses – Gemessen mit Impulsen
5 The Z1SMA is a diode operated in forward mode. Hence, the index of all parameters should be “F” instead of “Z”.
The cathode, indicated by a white band, has to be connected to the negative pole.
Die Z1SMA ist eine in Durchlass betriebene Si-Diode. Daher ist bei allen Kenn- und Grenzwerten der Index
"F” anstatt “Z” zu setzten. Die mit weißem Balken gekennzeichnete Kathode ist mit dem Minuspol zu verbinden.
© Diotec Semiconductor AG
http://www.diotec.com/
1