English
Language : 

15KE68 Datasheet, PDF (1/4 Pages) Fairchild Semiconductor – Discrete POWER & Signal Technologies
1.5 KE 6.8 ... 1.5 KE 440CA
Unidirectional and bidirectional
Transient Voltage Suppressor Diodes
Unidirektionale und bidirektionale
Spannungs-Begrenzer-Dioden
Dimensions / Maße in mm
Peak pulse power dissipation
Impuls-Verlustleistung
1500 W
Nominal breakdown voltage
Nominale Abbruch-Spannung
6.8...440 V
Plastic case – Kunststoffgehäuse
Ø 5.4 x 7.5 [mm]
Weight approx. – Gewicht ca.
1.1 g
Plastic material has UL classification 94V-0
Gehäusematerial UL94V-0 klassifiziert
Standard packaging taped in ammo pack
see page 16
Standard Lieferform gegurtet in Ammo-Pack siehe Seite 16
For bidirectional types (suffix “C” or “CA”), electrical characteristics apply in both directions.
Für bidirektionale Dioden (Suffix “C” oder “CA”) gelten die el. Werte in beiden Richtungen.
Maximum ratings and Characteristics
Kenn- und Grenzwerte
Peak pulse power dissipation (10/1000 :s waveform)
Impuls-Verlustleistung (Strom-Impuls 10/1000 :s)
Steady state power dissipation
Verlustleistung im Dauerbetrieb
Peak forward surge current, 60 Hz half sine-wave
Stoßstrom für eine 60 Hz Sinus-Halbwelle
TA = 25/C
TA = 25/C
TA = 25/C
Operating junction temperature – Sperrschichttemperatur
Storage temperature – Lagerungstemperatur
Max. instantaneous forward voltage
IF = 100 A VBR # 200 V
Augenblickswert der Durchlaßspannung
VBR > 200 V
Thermal resistance junction to ambient air
Wärmewiderstand Sperrschicht – umgebende Luft
PPPM
1500 W 1)
PM(AV)
6.5 W 2)
IFSM
200 A 3)
Tj – 50…+175/C
TS – 50…+175/C
VF
< 3.5 V 3)
VF
< 5.0 V 3)
RthA < 23 K/W 2)
Thermal resistance junction to lead
Wärmewiderstand Sperrschicht – Anschlußdraht
RthL
< 8 K/W
1) Non-repetitive current pulse see curve IPPM = f (tr)
Höchstzulässiger Spitzenwert eines einmaligen Strom-Impulses, siehe Kurve IPPM = f (tr)
2) Valid, if leads are kept at ambient temperature at a distance of 10 mm from case
Gültig, wenn die Anschlußdrähte in 10 mm Abstand von Gehäuse auf Umgebungstemperatur gehalten werden
3) Unidirectional diodes only – nur für unidirektionale Dioden
25.03.2003
1