ZXTR2008P5 Datasheet, PDF (4/7 Pages) Diodes Incorporated – 100V INPUT, 8.2V 40mA REGULATOR TRANSISTOR POWERDI®5

Electrical Characteristics (@T_A = +25°C, unless otherwise specified.)
Characteristic
Output Voltage (Note 12)
Line Regulation (Notes 12 & 13)
Symbol
Min
Typ
Max
V_OUT
7.38
8.2
9.02
∆V_OUT
—
10
300
Temperature Coefficient
∆V_OUT/∆T
—
10
—
Load Regulation (Notes 12 & 14)
∆V_OUT
—
Minimum Value of Input Voltage Required
to Maintain Line Regulation
V_IN(MIN)
12
Quiescent Current
I_Q
—
-180
-250
—
275
650
-400
-500
—
500
900
Power Supply Rejection Ratio
∆V_IN/∆V_OUT
—
38
—
Notes:
12. Measured under pulsed conditions. Pulse width ≤ 300μs. Duty cycle ≤ 2%.
13. Line regulation
14. Load regulation
∆V_OUT = V_OUT(@ V_IN = 72V) – V_OUT(@ V_IN = 15V)
∆V_OUT = V_OUT(@ I_OUT = 30mA) – V_OUT(@ I_OUT = 0.1mA)
∆V_OUT = V_OUT(@ I_OUT = 100mA) – V_OUT(@ I_OUT = 0.1mA)
A Product Line of
Diodes Incorporated
ZXTR2008P5
Unit
V
mV
mV/°C
mV
V
µA
dB
Test Condition
V_IN = 48V, I_OUT = 15mA
V_IN = 12 to 100V, I_OUT = 15mA
T_J = -40°C to +125°C
V_IN = 48V, I_OUT = 15mA
I_OUT = 0.1 to 30mA, V_IN = 48V
I_OUT = 0.1 to 100mA, V_IN = 48V
—
V_IN = 48V, I_OUT = 10µA
V_IN = 100V, I_OUT = 10µA
C_OUT = 100nF, I_OUT = 15mA,
V_OUT = 8.2V, V_IN=12 to 100V, f=100Hz
Typical Application Circuit
Pin Functions
Pin Name
V_IN
GND
V_OUT
Pin Function
Input Supply
Power Ground
Voltage Output
Notes
To maintain output regulation the input voltage can vary from 12V to 100V with respect to the GND pin. It is
recommended to connect a 1µF capacitor to GND.
This pin should be tied to the system ground.
Outputs a regulated 8.2V. It is recommended to connect a 10µF capacitor to GND. Minimum of 10µA must
be drawn from V_OUT to maintain regulation. The pin can be pulled high to a maximum of 14.5V with respect
to ground.
POWERDI is a registered trademark of Diodes Incorporated.
ZXTR2008P5
Document number: DS36333 Rev. 1 – 2
4 of 7
www.diodes.com
February 2014
© Diodes Incorporated