APD240_15 Datasheet, PDF (4/12 Pages) Diodes Incorporated – SCHOTTKY BARRIER RECTIFIERS

Marking Information (Cont.)
(3) SOD-123
(Top View)
XXX
APD240
First Line: Logo and Marking ID
(See Ordering Information)
Maximum Ratings (TA = +25^oC, unless otherwise noted.) (Note 5)
Characteristic
Symbol
Rating
Unit
Maximum Repetitive Peak Reverse Voltage
Maximum DC Blocking Voltage
VRRM
VDC
40
V
40
V
Maximum RMS Voltage
Average Rectified Forward Current
0.375 " (9.5mm) Lead Length (See Figure 1)
Non-Repetitive Peak Forward Surge Current
8.3ms Single Half Sine-wave on Rated Load
Operating Junction Temperature Range (Note 6)
Storage Temperature Range
VRMS
IF(AV)
IFSM
TJ
TSTG
28
V
2.0
A
50
A
-65 to +125
o_C
-65 to +150
o_C
Notes:
5. Stresses greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “Recommended Operating Conditions” is not implied.
Exposure to “Absolute Maximum Ratings” for extended periods may affect device reliability.
6. The heat generated must be less than the thermal conductivity from Junction to Ambient: dPD/dTJ < 1/θJA.
Thermal Characteristics (TA = +25^oC, unless otherwise noted.)
Characteristic
Symbol
Rating
Typical Thermal Resistance
(Note 7)
DO-41/DO-15
52
RθJA
DO-214AC
90
SOD-123
200
Note 7: Device mounted on heat sink, with minimum recommended pad layout per http://www.diodes.com
Electrical Characteristics (TA = +25^oC, unless otherwise noted.)
Unit
C/W
Characteristic
Symbol
Rating
Forward Voltage @ IF=2.0A
VF
0.5
0.5
Reverse Current @ Rated VR (Note 8)
IR
10
Note 8: Short duration pulse test used to minimize self-heating effect, Pulse Test: 300μs pulse width, 1.0% duty cycle.
APD240
Document number: DS36971 Rev. 2 - 2
4 of 12
www.diodes.com
Unit
V
mA
Test Condition
–
TA=+25C
TA=+100C
June 2014
© Diodes Incorporated