AP7361C Datasheet, PDF (4/22 Pages) Diodes Incorporated – 1A LOW DROPOUT ADJUSTABLE AND FIXED-MODE REGULATOR WITH ENABLE

AP7361C
Absolute Maximum Ratings (@TA = +25°C, unless otherwise specified.) (Note 4)
Symbol
VIN
–
TJ
TSTG
PD
PD
ESD HBM
ESD MM
Parameter
Input Voltage
OUT, ADJ, EN Voltage
Operating Junction Temperature Range
Storage Temperature Range
Power Dissipation
Power Dissipation
Human Body Model ESD Protection
Machine Model ESD Protection (Note 5)
U-DFN3030-8
TO252
SOT223
SOT89-5
SO-8EP
Rating
Unit
6.5
V
VIN +0.3
V
-40 to +150
°C
-65 to +150
°C
Internally limited by maximum junction
temperature of +150°C
–
1700
1250
1100
mW
800
1190
>2
KV
> 200
V
Notes:
4. Stresses greater than the 'Absolute Maximum Ratings' specified above may cause permanent damage to the device. These are stress ratings only;
functional operation of the device at these or any other conditions exceeding those indicated in this specification is not implied. Device reliability may be
affected by exposure to absolute maximum rating conditions for extended periods of time.
5. ESD MM rating at 150V for EN pin in SOT89-5 package.
Recommended Operating Conditions (@TA = +25°C, unless otherwise specified.)
Symbol
Parameter
Min
Max
Unit
VIN
VOUT
IOUT
TA
Input Voltage
Output Voltage
Output Current (Note 6)
Operating Ambient Temperature
2.2
6.0
V
0.8
5.0
V
0
1.0
A
-40
+85
C
Note:
6. The device maintains a stable, regulated output voltage without a load current. When the output current is large, attention should be given to the limitation
of the package power dissipation.
AP7361C
Document number: DS37274 Rev. 2 - 2
4 of 22
www.diodes.com
September 2015
© Diodes Incorporated