AP7361-10D Datasheet, PDF (4/22 Pages) Diodes Incorporated – 1A LOW DROPOUT ADJUSTABLE AND FIXED-MODE REGULATOR WITH ENABLE

AP7361
Absolute Maximum Ratings (@T_A = +25°C, unless otherwise specified.)
Symbol
ESD HBM
ESD MM
V_IN
T_J
T_ST
P_D
P_D
Parameter
Human Body Model ESD Protection
Machine Model ESD Protection (Note 5)
Input Voltage
OUT, ADJ, EN Voltage
Operating Junction Temperature Range
Storage Temperature Range
Power Dissipation (Note 4)
Power Dissipation (Note 4)
U-DFN3030-8
TO252
SOT223
SOT89-5
SO-8EP
Ratings
Unit
>2
KV
> 200
V
6.5
V
V_IN +0.3
V
-40 to +150
°C
-65 to +150
°C
Internally limited by maximum junction
temperature of +150°C
1700
1250
1100
mW
800
1190
Notes:
4. Ratings apply to ambient temperature at +25°C.
5. ESD MM rating at 150V for EN pin in SOT89-5L package.
Stresses greater than the 'Absolute Maximum Ratings' specified above, may cause permanent damage to the device. These are stress ratings only;
functional operation of the device at these or any other conditions exceeding those indicated in this specification is not implied. Device reliability may be
affected by exposure to absolute maximum rating conditions for extended periods of time.
Recommended Operating Conditions (@T_A = +25°C, unless otherwise specified.)
Symbol
V_IN
I_OUT
T_A
Parameter
Input Voltage
Output Current (Note 6)
Operating Ambient Temperature
Min
Max
Unit
2.2
6.0
V
0
1.0
A
-40
+85
C
Note:
6. The device maintains a stable, regulated output voltage without a load current. When the output current is large, attention should be given to the
limitation of the package power dissipation.
AP7361
Document number: DS33626 Rev. 9 - 2
4 of 22
www.diodes.com
October 2013
© Diodes Incorporated