AP1115AY33L-13 Datasheet, PDF (4/8 Pages) Diodes Incorporated – 0.6A LOW DROPOUT POSITIVE ADJUSTABLE OR FIXED-MODE REGULATOR

AP1115
Electrical Characteristics (cont.) (@T_A = +25°C, unless otherwise specified.)
Parameter
Dropout Voltage (V_IN-V_OUT)
Current Limit
Minimum Load Current
(Note 6)
Conditions
AP1115-ADJ/1.5/1.8
2.5/2.8/3.0/3.3/3.5/5.0
I_OUT = 0.6A, ΔV_OUT = 1%V_OUT
AP1115-ADJ/1.5/1.8
2.5/2.8/3.0/3.3/3.5/5.0
(V_IN -V_OUT) = 5V
AP1115-XXX
0°C ≤ T_J ≤ +125°C
Min
Typ
Max
Unit
—
1.1
1.3
V
0.7
—
—
A
—
5
10
mA
Thermal Regulation
Ripple Rejection
Temperature Stability
θ_JA
θ_JC
T_A = +25°C, 30ms pulse
f = 120Hz,C_OUT = 25µF Tantalum, I_OUT = 0.6A
AP1115-XXX
V_IN = V_OUT +3V
I_O = 10mA
Thermal Resistance Junction-to-Ambient
(No heat sink; No air flow) (Note 7)
Thermal Resistance Junction-to-Case
Control Circuitry/Power Transistor (Note 7)
—
0.008
0.04
%/W
—
60
70
dB
—
0.6
—
%
—
164
—
°C/W
—
35
—
°C/W
Notes:
6. Quiescent current is defined as the minimum output current required to maintain regulation. At 12V input/output differential the device is guaranteed to
regulate if the output current is greater than 10mA.
7. Test conditions for SOT89-3L: Device mounted on FR-4 substrate, 2oz copper, with minimum recommended pad layout.
AP1115
Document number: DS31025 Rev. 11 - 2
4 of 8
www.diodes.com
August 2012
© Diodes Incorporated