TL072 Datasheet, PDF (3/11 Pages) STMicroelectronics – LOW NOISE J-FET DUAL OPERATIONAL AMPLIFIERS

TL072
LOW NOISE JFET INPUT OPERATIONAL
AMPLIFIERS
Absolute Maximum Ratings (Note 8)
Symbol
Parameter
Rating
Unit
ESD HBM Human Body Model ESD Protection
1
KV
ESD MM Machine Model ESD Protection
200
V
V_CC+
V_CC-
V_I
Supply Voltage + (Note 3)
Supply Voltage - (Note 3)
Input voltage (Notes 3 and 5)
+18
V
-18
V
±15
V
V_ID
Differential input Voltage, V_ID (Note 4)
±30
V
Duration of output short circuit (Note 6)
Unlimited
P_D
Power Dissipation (Note 7)
T_J
Operating Junction Temperature Range
T_ST
Storage Temperature Range
860
mW
150
o_C
-65 to +150
o_C
Notes:
3. ALL voltage values, except differential voltages, are with respect to the midpoint between VCC+ and - VCC .
4. Differential voltage are at the non-inverting input terminal with respect to the inverting input terminal.
5. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15V, whichever is less.
6. The output may be shorted to ground or either supply. Temperature and/or supply voltage must be limited to ensure that the dissipation rating is
not exceeded.
7. Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient
temperature is PD=(TJ(max)-TA)/ θJA . Operating at the absolute maximum TJ of 150℃ can affect reliability
Recommended Operating Conditions (Note 8)
Symbol
Description
Rating
Unit
V_CC± Supply Voltage
±15
V
TA
Operating Ambient Temperature Range
-40 to +85
°C
Notes:
8. Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Recommended Operating Conditions indicate
conditions for which the device is intended to be functional, but specific performance is not guaranteed. For guaranteed specifications and the
test conditions, see the Electrical Characteristics.
TL072 Rev. 1
3 of 11
www.diodes.com
JULY 2009
© Diodes Incorporated