ZXTR2012FF Datasheet, PDF (2/7 Pages) Diodes Incorporated – 100V INPUT, 12V 30mA REGULATOR TRANSISTOR IN SOT23F

Absolute Maximum Ratings (Voltage relative to GND, @TA = +25°C, unless otherwise specified.)
Characteristic
Input Supply Voltage
Continuous Input & Output Current
Peak Pulsed Input & Output Current
Maximum Voltage Applied to VOUT
Symbol
VIN
IIN, IOUT
IIM, IOM
VOUT(MAX)
Value
-0.3 to 100
550
2
18
ZXTR2012FF
Unit
V
mA
A
V
Maximum Current at V_IN = 48V (@TA = +25°C, unless otherwise specified.)
Characteristic
Continuous Output Current
Pulsed Output Current
(Note 7)
(Note 8)
(Note 9)
Symbol
IOUT
IOM
Value
36
880
180
Unit
mA
mA
Thermal Characteristics
Characteristic
Power Dissipation
(Note 5)
(Note 6)
Thermal Resistance, Junction to Ambient
(Note 5)
(Note 6)
Thermal Resistance, Junction to Lead
(Note 10)
Thermal Resistance, Junction to Case
(Note 10)
Maximum Operating Junction and Storage Temperature Range
Symbol
PD
RθJA
RθJL
RθJC
TJ , TSTG
Value
1.3
1
95
126
59
38
-65 to +150
Unit
W
°C/W
C
ESD Ratings (Note 11)
Characteristics
Symbols
Value
Unit
JEDEC Class
Electrostatic Discharge – Human Body Model
ESD HBM
4,000
V
3A
Electrostatic Discharge – Machine Model
ESD MM
400
V
C
Notes:
5. For a device mounted with the exposed VIN pad on 25mm x 25mm 1oz copper that is on a single-sided 1.6mm FR-4 PCB; device is measured under still
air conditions whilst operating in steady-state.
6. Same as note 5, except mounted on 15mm x 15mm 1oz copper.
7. Same as note 5, whilst operating at VIN = 48V. Refer to Safe Operating Area for other Input Voltages.
8. Same as note 5, except measured with a single pulse width = 100µs and VIN = 48V.
9. Same as note 5, except measured with a single pulse width = 10ms and VIN = 48V.
10. RθJL = Thermal resistance from junction to solder-point (on the exposed VIN pad).
RθJC = Thermal resistance from junction to the top of case.
11. Refer to JEDEC specification JESD22-A114 and JESD22-A115.
ZXTR2012FF
Document number: DS38199 Rev. 2 - 2
2 of 7
www.diodes.com
April 2016
© Diodes Incorporated