ZXTD718MC Datasheet, PDF (2/7 Pages) Diodes Incorporated – DUAL 20V PNP LOW SATURATION SWITCHING TRANSISTOR

A Product Line of
Diodes Incorporated
ZXTD718MC
Maximum Ratings
Parameter
Collector-Base Voltage
Collector-Emitter Voltage
Emitter-Base Voltage
Peak Pulse Current
Continuous Collector Current (a) (f)
Base Current
Symbol
V_CBO
V_CEO
V_EBO
I_CM
I_C
I_B
Limit
-25
-20
-7.5
-6
-3.5
-1
Unit
V
V
V
A
A
A
Thermal Characteristics
Characteristic
Power Dissipation at T_A = 25°C (a) (f)
Linear Derating Factor
Power Dissipation at T_A = 25°C (b) (f)
Linear Derating Factor
Power Dissipation at T_A = 25°C (c) (f)
Linear Derating Factor
Power Dissipation at T_A = 25°C (d) (f)
Linear Derating Factor
Power Dissipation at T_A = 25°C (d) (g)
Linear Derating Factor
Power Dissipation at T_A = 25°C (e) (g)
Linear Derating Factor
Junction to Ambient (a) (f)
Junction to Ambient (b) (f)
Junction to Ambient (c) (f)
Junction to Ambient (d) (f)
Junction to Ambient (d) (g)
Junction to Ambient (e) (g)
Operating and Storage Temperature Range
Symbol
P_D
P_D
P_D
P_D
P_D
P_D
R_θJA
R_θJA
R_θJA
R_θJA
R_θJA
R_θJA
T_J, T_STG
Value
1.5
12
2.45
19.6
1
8
1.13
9
1.7
13.6
3
24
83.3
51
125
111
73.5
41.7
-55 to +150
Unit
W
mW/°C
W
mW/°C
W
mW/°C
W
mW/°C
W
mW/°C
W
mW/°C
°C/W
°C/W
°C/W
°C/W
°C/W
°C/W
°C
Notes:
a. For a dual device surface mounted on 8 sq cm single sided 2 oz copper on FR4 PCB, in still air conditions with all exposed pads attached. The copper
area is split down the centre line into two separate areas with one half connected to each half of the dual device.
b. Measured at t <5 secs for a dual device surface mounted on 8 sq cm single sided 2 oz copper on FR4 PCB, in still air conditions with all exposed pads
attached. The copper area is split down the centre line into two separate areas with one half connected to each half of the dual device.
c. For a dual device surface mounted on 8 sq cm single sided 2 oz copper on FR4 PCB, in still air conditions with minimal lead connections only.
d. For a dual device surface mounted on 10 sq cm single sided 1 oz copper on FR4 PCB, in still air conditions with all exposed pads attached. The
copper area is split down the centre line into two separate areas with one half connected to each half of the dual device.
e. For a dual device surface mounted on 85 sq cm single sided 2 oz copper on FR4 PCB, in still air conditions with all exposed pads attached. The
copper area is split down the centre line into two separate areas with one half connected to each half of the dual device.
f. For a dual device with one active die.
g. For dual device with 2 active die running at equal power.
ZXTD718MC
Document Number DS32000 Rev. 1 - 2
2 of 7
www.diodes.com
January 2010
© Diodes Incorporated