PDS1040_15 Datasheet, PDF (2/6 Pages) Diodes Incorporated – 10A SCHOTTKY BARRIER RECTIFIER POWERDI®5

Maximum Ratings (@TA = +25°C, unless otherwise specified.)
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
Average Rectified Output Current
Non-Repetitive Peak Forward Surge Current
8.3ms Single Half Sine-Wave Superimposed on Rated Load
Symbol
VRRM
VRWM
VR
VR(RMS)
IO
IFSM
PDS1040
Value
Unit
40
V
28
V
10
A
275
A
Thermal Characteristics
Characteristic
Thermal Resistance Junction to Soldering Point
Thermal Resistance Junction to Ambient Air (Note 5)
Thermal Resistance Junction to Ambient Air (Note 6)
Thermal Resistance Junction to Ambient Air (Note 7)
Operating Junction Temperature Range
Storage Temperature Range
VR  80% VRRM
VR  50% VRRM
Symbol
R_JS
R_JA
R_JA
R_JA
TJ
TSTG
Typ
Max

1.5
95

75

50

-65 to +150
-65 to +180
-65 to +150
Unit
°C/W
°C/W
°C/W
°C/W
°C
°C
Electrical Characteristics (@TA = +25°C, unless otherwise specified.)
Characteristic
Reverse Breakdown Voltage (Note 8)
Forward Voltage
Reverse Leakage Current (Note 8)
Symbol Min
V(BR)R
40

VF




IR



Typ

0.45
0.47

0.42
0.02
5.5
0.03
6.5
Max Unit

V
0.49
0.51
0.41
V
0.49
0.3
25
0.7
mA
50
Notes:
5. FR-4 PCB, 2oz. Copper, minimum recommended pad layout per http://www.diodes.com.
6. Polyimide PCB, 2oz. Copper, minimum recommended pad layout per http://www.diodes.com.
7. Polyimide PCB, 2oz. Copper. Cathode pad dimensions 9.4mm x 7.2mm. Anode pad dimensions 2.7mm x 1.6mm.
8. Short duration pulse test used to minimize self-heating effect.
9. Polyimide PCB, 2oz. Copper. Cathode pad dimensions 18.8mm x 14.4mm. Anode pad dimensions 5.6mm x 3.0mm.
10. Devices mounted such that RJA = 19°C/W.
Test Condition
IR = 1mA
IF = 8A, TS = +25°C
IF = 10A, TS = +25°C
IF = 8A, TS = +125°C
IF = 10A, TS = +125°C
TS = +25C, VR = 35V
TS = +100C, VR = 35V
TS = +25C, VR = 40V
TS = +100C, VR = 40V
POWERDI is a registered trademark of Diodes Incorporated.
PDS1040
Document number: DS30538 Rev. 11 - 2
2 of 6
www.diodes.com
June 2015
© Diodes Incorporated