PDS1040L_15 Datasheet, PDF (2/6 Pages) Diodes Incorporated – 10A LOW VF SCHOTTKY BARRIER RECTIFIER POWERDI®

Maximum Ratings (@TA = +25°C, unless otherwise specified.)
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
Average Rectified Output Current
Non-Repetitive Peak Forward Surge Current
8.3ms Single Half Sine-Wave Superimposed on Rated Load
Symbol
VRRM
VRWM
VR
VR(RMS)
IO
IFSM
PDS1040L
Value
Unit
40
V
28
V
10
A
275
A
Thermal Characteristics
Characteristic
Thermal Resistance Junction to Soldering Point
Thermal Resistance Junction to Ambient Air (Note 5) TA = +25°C
Thermal Resistance Junction to Ambient Air (Note 6) TA = +25°C
Thermal Resistance Junction to Ambient Air (Note 7) TA = +25°C
Operating Junction Temperature Range
VR  80% VRRM
VR  50% VRRM
Storage Temperature Range
Symbol
R_JS
R_JA
R_JA
R_JA
TJ
TSTG
Typ
Max

1.5
85

65

50

-65 to +130
-65 to +150
-65 to +150
Unit
°C/W
°C/W
°C/W
°C/W
°C
°C
Electrical Characteristics (@TA = +25°C, unless otherwise specified.)
Characteristic
Reverse Breakdown Voltage (Note 8)
Forward Voltage
Reverse Current (Note 8)
Symbol
Min
Typ
Max Unit
V(BR)R
40


V

0.41 0.46

0.30 0.35
VF


0.42 0.47
0.32 0.41
V

0.44 0.49

0.35 0.43
IR


0.07
12.5
0.6
25
mA
Notes:
5. R-4 PCB, 2oz. Copper, minimum recommended pad layout per http://www.diodes.com.
6. Polymide PCB, 2oz. Copper, minimum recommended pad layout per http://www.diodes.com.
7. Polymide PCB, 2oz. Copper. Cathode pad dimensions 9.4mm x 7.2mm. Anode pad dimensions 2.7mm x 1.6mm.
8. Short duration pulse test used to minimize self-heating effect.
9. Polymide PCB, 2oz. Copper. Cathode pad dimensions 18.8mm x 14.4mm. Anode pad dimensions 5.6mm x 3.0mm.
10. Devices mounted such that RJA  19°C/W.
Test Condition
IR = 600µA
IF = 6A, TS = +25°C
IF = 6A, TS = +125°C
IF = 8A, TS = +25°C
IF = 8A, TS = +125°C
IF = 10A, TS = +25°C
IF = 10A, TS = +125°C
TS = +25°C, VR = 40V
TS = +100°C, VR = 40V
POWERDI is a registered trademark of Diodes Incorporated.
PDS1040L
Document number: DS30486 Rev. 13 - 2
2 of 6
www.diodes.com
June 2015
© Diodes Incorporated