PDS1040L_10 Datasheet, PDF (2/5 Pages) Diodes Incorporated – 10A LOW VF SCHOTTKY BARRIER RECTIFIER

Maximum Ratings @T_A = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
Average Rectified Output Current (see also Figure 5)
Non-Repetitive Peak Forward Surge Current
8.3ms Single Half Sine-Wave Superimposed on Rated Load
Symbol
V_RRM
V_RWM
V_R
V_R(RMS)
I_O
I_FSM
PDS1040L
Value
Unit
40
V
28
V
10
A
275
A
Thermal Characteristics
Characteristic
Thermal Resistance Junction to Soldering Point
Thermal Resistance Junction to Ambient Air (Note 3) T_A = 25°C
Thermal Resistance Junction to Ambient Air (Note 4) T_A = 25°C
Thermal Resistance Junction to Ambient Air (Note 5) T_A = 25°C
Operating Junction Temperature Range
V_R ≤ 80% V_RRM
V_R ≤ 50% V_RRM
Storage Temperature Range
Symbol
R_θJS
R_θJA
R_θJA
R_θJA
T_J
T_STG
Typ
Max
⎯
1.5
85
⎯
65
⎯
50
⎯
-65 to +130
-65 to +150
-65 to +150
Unit
°C/W
°C/W
°C/W
°C/W
°C
°C
Electrical Characteristics @T_A = 25°C unless otherwise specified
Characteristic
Reverse Breakdown Voltage (Note 6)
Forward Voltage
Reverse Current (Note 6)
Symbol
Min
Typ
Max
Unit
V_(BR)R
40
⎯
⎯
V
⎯
0.41
0.46
⎯
0.30
0.35
V_F
⎯
0.42
0.47
⎯
0.32
0.41
V
⎯
0.44
0.49
⎯
0.35
0.43
I_R
⎯
⎯
0.07
0.6
12.5
25
mA
Notes:
3 R-4 PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com.
4. Polymide PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com.
5. Polymide PCB, 2 oz. Copper. Cathode pad dimensions 9.4mm x 7.2mm. Anode pad dimensions 2.7mm x 1.6mm.
6. Short duration pulse test used to minimize self-heating effect.
7. Polymide PCB, 2 oz. Copper. Cathode pad dimensions 18.8mm x 14.4mm. Anode pad dimensions 5.6mm x 3.0mm.
8. Devices mounted such that RθJA ≅ 19°C/W.
Test Condition
I_R = 600μA
I_F = 6A, T_S = 25°C
I_F = 6A, T_S = 125°C
I_F = 8A, T_S = 25°C
I_F = 8A, T_S = 125°C
I_F = 10A, T_S = 25°C
I_F = 10A, T_S = 125°C
T_S = 25°C, V_R = 40V
T_S = 100°C, V_R = 40V
PowerDI is a registered trademark of Diodes Incorporated.
PDS1040L
Document number: DS30486 Rev. 11 - 2
2 of 5
www.diodes.com
November 2010
© Diodes Incorporated